Features; Product Specifications; Spindle Lock Button - Ryobi C358 Operator's Manual

PRODUCT SPECIFICATIONS

n Input.............................. 120V, 60 Hz, AC Only,15 Amps
n No Load Speed..............................................3,900/min.
n Arbor Diameter ........................................................ 1 in.
n Wheel Diameter ..................................................... 14 in.
n Net Weight ........................................................ 37.6 lbs.
n Fence Angle....................................Right (45˚), Left (45˚)
MACHINE
ARM
MOTOR
ADJUSTABLE
FENCE
MACHINE
BASE
VISE
CLAMP
KNOW YOUR CUT-OFF MACHINE
See Figures 2 - 3.
Before attempting to use your machine, familiarize yourself
with all operating features and safety requirements.
MOTOR
This machine has a strong motor with sufficient power to
handle tough cutting jobs. It also has externally accessible
brushes for ease of servicing.
14 in. ABRASIVE WHEEL
A 14 in. abrasive wheel is included with the cut-off machine.
It will cut materials up to 5 in. thick or 8 in. wide, depending
upon the thickness or width of the material and the setting
at which the cut is being made.

FEATURES

n Vise Clamp Angle ...........................Right (45˚), Left (45˚)
n Maximum Cutting Capacities:
SWITCH
TRIGGER
SPINDLE
LOCK BUTTON
LOWER
WHEEL
GUARD
14 in.
ABRASIVE
WHEEL
VISE SCREW
QUICK LOCK-
RELEASE LEVER
VISE CRANK
HANDLE
TRANSPORT
CHAIN
SELF-RETRACTING LOWER WHEEL GUARD
The lower wheel guard provides protection from each side
of the wheel. It retracts over the upper wheel guard as the
wheel is lowered into the workpiece.

SPINDLE LOCK BUTTON

A spindle lock button has been provided for locking the
spindle which keeps the wheel in the machine from rotating.
Depress and hold the spindle lock button while installing,
changing, or removing wheel only.
QUICK LOCK-RELEASE LEVER
A quick lock-release lever has been provided on the cut-off
machine. This feature allows you to open and close the vise
clamp quickly without repetitive turning of the vise crank
handle.
9
Round Pipe ................................ 5 in. outside diameter
Angle Stock ................... 6-1/2 in. wide x 3-5/16 in. tall
Flat Metal Stock............................. 2-1/2 in. x 9-1/2 in.
WRENCH
STORAGE
WRENCH
Fig. 2