Sending Messages - Telrad DIGITAL KEY BX SBU-5 User Manual

MESSAGES
If after dialing an extension, there is no answer or you hear
busy tone, you can send a basic message or a message
from a predefined list, which appears on the display of the
extension you called.
When you send a basic message, display telephones show
"CALL" followed by your extension name or number (e.g.,
"CALL STEVE").
When you send a predefined message, display telephones
show the text of the message, followed by your extension
name or number (e.g., "GONE OUT STEVE").

SENDING MESSAGES

To send a basic message
After dialing an extension:
1. Press {MESSAGE}.
2. Press [RELEASE].
The message ("CALL ATT") is sent to the called exten-
sion.
To select and send a predefined message
After dialing an extension:
1. Press {MESSAGE}.
The first five of the available messages are displayed.
To view more messages:
2. Press {NXT SCREEN}.
See also Receiving
20
messages, below.
Attendant console