Telrad DIGITAL KEY BX SBU-5 User Manual page 10

To adjust the display contrast
While the console is in idle state:
• Press [<LO HI>] to change the display contrast.
DISCONNECTING A CALL
Pressing [DROP] disconnects the console from the current
process, and returns the console to the previous stage of
the process.
Pressing [RELEASE] terminates a call in progress, or
completes the transfer of an outside line. Afterwards, the
console is returned to an inactive state.
THE [ANSWER] BUTTON
Pressing [ANSWER] completes the transfer of the current
call and connects you to the next call in the Main Call
queue.
DIALING ON THE CONSOLE
If you are connected to an outside line and the [DIAL
CONT] indicator is on, any digits you press are dialed on
the outside line.
If the [DIAL CONT] indicator is off, any digits you press are
considered the beginning of a transfer process.
When dialing internally or when dialing a system feature,
the [DIAL CONT] indicator should be off.
You need to use [DIAL CONT] when dialing to Voice Store
& Forward machines, SPRINT, MCI lines etc.
6 Attendant console