Panasonic K-NL404K/G Quick Start Manual page 23

Step 2 Set parameters.
Channel: Please select the channel number first. You can select "all" if you want to set for

the whole channels.
: Sync connection icon. Select icon

edited or together. Now the icon is shown as
: Click it to delete a record type from one period.

Record Type: Please check the box to select corresponding record type. There are four

types: Regular/MD (motion detect)/Alarm/MD&Alarm.
Week day: There are eight options: ranges from Saturday to Sunday and all.

Holiday: It is to set holiday setup. Please note you need to go to the General interface (Main

Menu->Setting->System->General) to add holiday first. Otherwise you cannot see this item.
Pre-record: System can pre-record the video before the event occurs into the file. The value

ranges from 1 to 30 seconds depending on the bit stream.
Redundancy: System supports redundancy backup function. It allows you backup recorded

file in two disks. You can highlight Redundancy button to activate this function. Please note,
before enable this function, please set at least one HDD as redundant. (Main menu->Setting-
>Storage->HDD Manager). Please note this function is null if there is only one HDD.
ANR: It is to save video to the SD card of the network camera in case the network

connection fails. The value ranges from 0s～43200s. After the network connection resumed,
the system can get the video from the SD card and there is no risk of record loss.
Period setup: Click button

Figure 4-11
of several dates, all checked items can be
.
after one date or a holiday, you can see an interface shown
18