Exhaust Requirements And Maintenance - LG TD-V75120E Use And Care Manual

xhaust requirements and maintenance
E
Exhaust and Dryer Maintenance
WARNING!
Disconnect the dryer s electric power
prior to any cleaning or maintenance.
1.After one year of use, the interior and complete
exhaust system of the dryer should be examined
and cleaned if necessary.
2.Before one year of use, when drying
performance has been suddenly unsatisfied in
the past several cases, please examine and
clean the exhaust duct for better drying
performance.
3.Check the weather hoods frequently to ensure
the dampers are moving freely, that the dampers
are not pushed in and that nothing has been set
against the dampers.
4.A qualified service person or company should be
used to perform this maintenance.
5.A Flexible Metal Vent Kit, available at extra cost,
can be used to exhaust the dryer when it is
placed in hard to reach places. This Kit comes in
two pieces, one of which is attached to the dryer
and the other is attached to the wall exhaust
outlet.
10
6.Following attachment of the two separate pieces
to the dryer and the wall, the dryer may be
returned to its final position, after which the two
pieces themselves can be connected.
7.Ordinarily, the dryer drum will need no care.
Wipe the exterior of the dryer as required, and
always immediately wipe the exterior of the
dryer in the event any detergent, bleach, or
other washing products is spilled on the dryer,
because these products may cause permanent
damage to the exterior finish of the dryer.
8.Clean the control panel with a damp cloth as
necessary. Warning: spray pre-wash products
may damage the finish of the control panel.
9.Please clean the lint filter either before drying
each load or after drying each load.
10.Always make sure the lint filter is clean before
starting a new load, because a clogged lint filter
may increase drying times.
11. Annually remove the lint filter and attach it to
the vacuum duct.
12.Please note that the wiring diagram is provided
inside the dryer Top Plate. Label all wires prior
to disconnection when servicing the dryer,
because wiring errors can cause serious injury
to you and your dryer.