LG TD-V75120E Use And Care Manual page 14

perating your dryer
O
5. Close the Door.
Before you close the door, make sure fabrics are
well placed inside and that foreign objects,
especially flammable ones, are not caught around
door.
6. Select the Drying Cycle you want.
You can choose a cycle by turning the program
control knob until the required program reaches to
its indicator. If you only press Start/Pause button
without choosing any cycle, the dryer will proceed
with the Standard program. [Please refer to
following Cycle Selection table (page 13) for the
detailed information]
7. Press the Start button.
You can hear drum rotating.
8. After operation is completed, open
the door and remove the laundry.
Careful! the drum inside could be still hot.
(Operation time varies depending on your cycle
selection or options.)
9. Clean the Lint Filters.
The lint filter should be cleaned after each load.
10. Turn off the Dryer.
Press the "Power" button.
Note
- Be careful of the fact that filter should not be
torn when using a vaccum cleaner. If there is a
little residue buildup on filter, you can scrub lint
screen with the brush to remove.
- If you want to open the door while dryer is
operating, please press the Start/Pause button
first, wait until drum completely stops and then
open the door.
14
Select the
desired
cycle.
Take out
the laundry.
Clean the
door lint
filter.