Table of Contents
Advertisement
1. About this Manual
This manual provides the information necessary to help customers install and operate the PSU1.
This manual should also be read in conjunction with the product brochure
outline drawing
DS2779
The PSU1 is compatible with a wide range of Bartington Instruments' magnetometers. The
datasheet and operation of the sensor(s) used should also be read.
Photographs of key components are included, labelled with numbers. A number in the text in
square brackets [ ] refers to that label.
Caution: This manual applies only to the PSU1 Power Supply Unit. For the earlier Mag-
03PSU, please use the manual supplied with that unit or contact Bartington Instruments
info@bartington.com.
1.1. Symbols Glossary
The following symbols used within this manual call your attention to specific types of
information:
WARNING: Indicates a situation in which serious bodily injury or death could result if the
warning is ignored.
Caution: Indicates a situation in which bodily injury or damage to your instrument, or both,
could result if the caution is ignored.
Identifies items that must be disposed of safely to prevent unnecessary damage to the
environment.
Note: Provides useful supporting information on how to make better use of your purchase.
2. Safe Use
WARNING: The PSU1 is fitted with AA size NiMH (Nickel Metal Hydride) rechargeable
batteries. Only AA size rechargeable batteries, which are specified as compatible in the
relevant product brochure, can be used in this product.
WARNING: The fitting of non-approved battery cells may be dangerous. It could affect the
safety of users, damage the equipment and also invalidate the terms and conditions of the
Warranty.
BARTINGTON INSTRUMENTS
can also be found on the
Page 3 of 18
product
page.
DS2520
and the unit's
OM2443/4
Advertisement
Table of Contents
