Table of Contents
Advertisement
Network - IP address changed- Reboot
After a network change the system will reboot to ensure all the changes have been applied.
The Reboot Screen is shown to instruct the user on how to access the lamp after the new
network settings have been applied.
Warning: We strongly recommend that IP addresses are changed via the Discovery
Application Tool. This is the safest way to ensure that connection is not last with the
lamp by setting up an invalid IP address.
System Information
This page shows basic information regarding the lamp including software version, product
type, lamp name and group name. This is for information only and cannot be altered on this
page.
Reboot/Restart Lamp
It is also possible to reboot/restart the lamp. The lamp will restart using the existing settings
of the lamp.
www.rayteccctv.com
26
Raytec Global Tel: +44 (0) 1670 520055
Raytec Americas Tel: +1 613 270 9990
Advertisement
Table of Contents
