Connection To Power - Challenge HTJ-2027 Instruction Manual

CONNECTION TO POWER

• Before connecting, check that the voltage indicated on the appliance
corresponds with the mains voltage in your home. If this is not the case,
consult your dealer and do not use.
• This appliance may be fitted with a non-rewirable plug. If you need to change
the fuse in a non–rewirable plug, the fuse cover must be refitted. If the fuse
cover is lost or damaged, the plug must not be used until a replacement is
obtained.
• If the plug has to be changed because it is not suitable for your socket, or
becomes damaged, the appliance should be disconnected from the mains
power supply. The plug should be cut off and an appropriate plug fitted
following the wiring instructions. The removed plug must be disposed of
safely as insertion into a mains socket is likely to cause an electrical hazard.
• This equipment must be disconnected from the mains when not in use. Do
not allow this unit to be exposed to rain or moisture.
For your own safety read the following instructions carefully before
attempting to connect this unit to the mains.
You should only plug the appliance into a 220-240V AC, 50/60Hz supply.
Connecting it to other power sources may damage the appliance.
IMPORTANT
The colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows:
• The blue wire must be connected to the terminal marked with the letter N or
coloured black
• The brown wire must be connected to the terminal marked with the letter L or
coloured red.
If a 13 Amp (BS 1363) fused plug is used it must be fitted with a 3A fuse
conforming to BS 1362 and be ASTA approved.
If in doubt contact a qualified electrician.
The wires in the mains lead are coloured in
accordance with the following code:
BLUE = NEUTRAL
To prevent electric shock disconnect from the
mains before removing the cover
BROWN = LIVE
Caution