KNOW YOUR APPLIANCE
1. Fog nozzle
2. Water tank
3. Base
4. Control Knob
5. Main Power switch
First time use
Filling the water tank:
We recommend using distilled water to avoid limescale build-up but if
using tapwater in a hardwater area we recommend regular cleaning to
avoid limescale build-up. Make sure water temperature does not exceed
40° C.
(Put the appliance down on a suitable flat horizontal surface, and where it is to
be used.)
Note: Do not use on any surface that may be damaged by water, (during refill
some water drops may be spilt)