Touch Dynamic TP3000 Installation

Thermal Printer TP3000 Installation for Web Print (manual print)

Printer Driver

After you receive the TP3000 Printer you will need to download and install the Printer
Driver Software. This is a simple process and can be done with the following steps.
1) First Visit the website http://www.touchdynamic.com
2) Next, mouse over the Products Button, mouse over Printers and select "Printer
TP3000"
3) Click on the "Drivers" Icon
4) Under "Drivers" you'll find "THERMALPOSPrinterDriver-3.7.1.zip, click on it and
select "open"
5) When the window opens, select THERMAL POSPrinterDriver-3.7.1.zip by double
clicking
6) Next click on "Run"
7) The Install Shield Wizard will pop up, click "next"
8) Next, the setup window will appear and your screen will change several times
9) "Thermal Printer Driver Installation window will appear
10) Select the checkbox for " THERMAL LK_TXXX"
11) Click on "Installation"
12) The next window is "Select OS Information Dialog"
13) You'll need to select the operating system, for the Breeze Touch screen select
Windows XP (or select your operating system)
14) Leave the Code Page
15) Select a Printer Port "USB" for standard configuration.
16) Click "OK"
17) Click "OK" again to reboot
18) Wait for the reboot, and then follow the "Printer Settings" Instructions.

Printer Settings WEB (Manual Print)

After installing the TP3000 Printer you will need to change the Page Properties in
Internet Explorer for the printer to print correctly.
1) First open up a page and link to the POS section, each customer has their own
unique encrypted web address.
2) Next, Clock-in or Clock out and a page will appear.