Subscribe to Our Youtube Channel
Related Manuals for Touch Dynamic PR-T25
Summary of Contents for Touch Dynamic PR-T25
- Page 1 MODEL : PR-T25 Receipt Printer User’s Manual All specifications are subject to change without notice...
-
Page 3: Table Of Contents
Table of Contents 1. Parts Identifications 1. Parts Identifications 2. Setting up the printer 2.1 Unpacking 2.2 Connecting the cables 2.3 Loading the roll paper 2.4 Managing a cutter Jam 3. Control panel and other functions FRONT COVER 3.1 Control panel Open this cover to load or replace paper 3.2 Error Indicating... -
Page 4: Setting Up The Printer
2. Setting Up the Printer 2-1. Unpacking 2-2. Connecting the Cables Your printer box should include these items. If any items are damaged or missing, please contact your All cables connect to the connector panel on the back of the printer which is shown below: dealer for assistance. - Page 5 2-2-1. Interface Connector Centronics Parallel Interface SIGNAL DESCRIPTION STROBE- Input Synchronize signal Data received DATA0~7 Input/Output Data bit Transmitted 0~7 ACK- Output Data receiving completed. BUSY Output Impossible to print of data receiving. Output Paper empty SELECT Output Printer status for ON/OFF line AUTO FEED- Input Paper auto feed signal...
-
Page 6: Loading The Roll Paper
2-2-2. Cash Drawer Connector 2-3. Loading the Roll Paper The printer can operate two cash drawers with a 6 pin RJ-11 modular connector. Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the The driver is capable of supplying a maximum current of 0.1A for 510ms or less when not printing. -
Page 7: Managing A Cutter Jam
5. Note the correct direction that the paper comes off the roll: 2-4. Managing a cutter Jam ♣CAUTION: When the paper cutter is jammed, the top cover might be stuck closed. In this case, repeat power on and off several times. If the top cover is still stuck, please follow the steps to release the paper jam. -
Page 8: Control Panel And Other Functions
3. Control panel and other functions 4. Self Test The self-test result indicated whether the printer is operating properly. Also with this, user can check 3-1. Control panel following options or status of the printer. You can control the basic paper feeding operations of the printer with the button on the control panel. The indicator lights let you to monitor the printer’... -
Page 9: Ascii Print
5. ASCII Print 7. Hexadecimal Dump ASCII PRINT is printing a test page constructed ASCII code. You can able to check the printer works This feature allows experienced users to see exactly what data is coming to the printer. This can be properly with this useful in finding software problems. -
Page 10: Specifications
8. Specifications 8-1. General Specifications (8) Overall dimension (1) Printing Method Direct line thermal printing. (2) Print speed 200mm/sec (3) Dot density (Hor / Ver) 180 DPI X 180 DPI (4) Dot Pitch 0.142mm X 0.142mm (5) Printing Width Max 72mm (512 dots) (6) Number of print columns. -
Page 11: Auto Cutter Specifications
8-2. Auto Cutter Specifications ♣ Important! When using a printer power supply other than optional AC adaptor, be sure that the following (1) Cutting Frequency Max. 30 cuts per minute cautions are observed. Use a power supply (Limited Power Supply) of DC 24V±10% and more than 1.75A. (2) Thickness of paper 0.06 ~ 0.09 mm Be careful about installing the printer in an area where there is noise. -
Page 12: Command List
9. Command List Command Function REMARKS Command Function REMARKS Horizontal tab ESC t Select character code table Print and line feed ESC { Turn upside-down printing mode on/off FS p Print NV bit image Print and carriage return Print and return to standard mode(in page mode) FS q Define NV bit image GS ! - Page 13 T25 Rev 1.0 11/12...
Need help?
Do you have a question about the PR-T25 and is the answer not in the manual?
Questions and answers