Advertisement
Thank you for purchasing the Sharper Image Tablet Holder with Speakers. Please take
a moment to review these instructions and retain them for future reference.
SPECIFICATIONS
Output Power: 5W S/N: >85dB
Frequency range: 50Hz-20KHz
Power supply: Lithium battery or USB cable
Audio source: iPhone, iPad, Smartphone, Notebook,
MP3 player, etc.
Functions: Bluetooth, Microphone, Auxiliary Line-In
Wireless range: 10m
Size: 200mm x 73mm x 32mm
Charges via: USB
PARTS IDENTIFICATION
LED indicator light
ON/OFF switch
Auxiliary line-in
USB charging socket
CABLE CONNECTION
Connect your mobile device to the Tablet Holder with
Speakers with a standard 3.5mm audio cable. Plug
one end into the headphone jack of your device. Plug
the other end into the Auxiliary Line-In jack on the
Tablet Holder with Speakers.
TABLET HOLDER WITH SPEAKERS
Item No. 204418
Owner's Guide
- 1 -
CHARGING
• Please charge the built-in rechargeable lithium battery for
at least 8 hours prior to first use.
• Use only the supplied USB micro cable to recharge the
battery. Improper charging may damage the battery and the
Tablet Holder.
• When charging is completed, the red light will go off.
• Do not attempt to open the battery.
• Keep out of reach of children.
• Avoid storing the battery in extremely hot or cold
environment.
• Always dispose of batteries according to local laws.
ADJUSTING THE POSITION
Open for optimum
viewing comfort
BLUETOOTH CONNECTION
1. Activate pairing mode on the Tablet Holder with
Speakers by switching the ON/OFF button to ON.
The LED will slowly flash a green color.
2. On your tablet, navigate to the Bluetooth function.
3. Select "Set Up" Bluetooth or turn "ON" Bluetooth.
4. Select "Search" or "Discover" devices.
5. Select "Bluetooth."
6. If requested, type the password 0000.
7. Press the Enter key.
8. When the Bluetooth connection is established,
the LED will turn solid green.
Fold for easy storage
Advertisement
