Warranty Attention CA, IA and WI Consumers In compliance with state law for CA, IA and WI, Propur™ water filtration products are sold and shipped to residents of these states without any health related performance claims except for aesthetics including chlorine reduction, and...
NSF: WHY IS NSF IMPORTANT? With a mission to protect and improve human health globally, NSF is an independent accredited organization that tests and certifies a product to ensure that it meets the regulatory requirements necessary by the United States as well as testing requirements for many other countries. The NSF water certification is used as a mark of distinction for consumers to have knowledge that the product they are using is able to safely and effectively remove contaminants from drinking water.
PrOOne® G2.0 Performance The ProOne G2.0 filter has been tested in accordance with NSF 42 ® and 53 standards, and NSF protocol P231. Test results from an independent water testing Lab certified by the state of New Jersey Department of Environmental Protection show the ProOne G2.0 filter removes and/or reduces contaminants ®...
Page 5
TDS is a measure of total dis- solved solids and NOT dissolved contaminants. A higher TDS can simply be high calcium or mineral content. As Propur™ filters are made from miner- als, TDS may be higher after the water has been treated. This does not mean the filter isn’t working, it means the TDS meter is picking up the min-...
Spigot Non-slip pad Propur™ Systems are made from imported and domestic components manufactured to Propur™ specifications and standards and assembled in Commerce Twp, Michigan USA. For the latest information and instructions on assembling and maintaining Propur™ products, please visit www.propurusa.com.
Installation Selecting a location for your system Your system should be placed in a cool place on a flat surface. Setting up the system 1) Hold knob on top side of lid and insert screw with washer from underneath side of lid and tighten with screwdriver. 2) Install spigot (see Installation Diagram A on page 6 for details).
DIAGRAM A — SPIGOT INSTALLATION NEW On/Off Spigot handle On - 6 o’clock position Container Off - 3 o’clock position Stainless steel NEW “wide mouth” washer on Stainless steel the inside washer on One white washer the outside goes on the out- side and one on the inside of the container.
What your Propur™ Scout includes: 1-Upper Container 1-Lower Container 1-Filter Element, wing nut & washer 1-Scrubby sponge There is NO spigot required for the Scout Cleaning System 1) Wash your hands. 2) Use liquid dish washing soap along with the yellow side of the enclosed scrubby sponge to clean the stainless steel parts of your unit.
The first cycle of water generally takes longer but the flow rate will increase with use. System ProOne® G2.0 Flow Rate (Hours)* Scout Traveler Nomad King *based on standard filter configuration Please note it is normal to see some water left in the upper container.
Page 11
How should I store my filters? If NOT using your Propur™ system for any period of time, we suggest you remove the lid, drain any water that is left in the lower container and remove the filter elements from your system and allow to air dry. Wrap your filter elements in a terrycloth towel and store in a dry and cool place.
PROPUR LIMITED WARRANTY Lincoln-Remi Group, LLC d/b/a Propur (“PP”) sells its products with the intent that they are free from defects. PP warrants to the original retail purchaser/consumer that its products will be free of defects in material and workmanship under nor-...
Need help?
Do you have a question about the Scout and is the answer not in the manual?
Questions and answers