Ryobi RC960 Operator's Manual page 7

KNOW YOUR RADIO CHARGER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety requirements.
Features include easily operated am/fm radio; built-in
charger; tool rest for your drill-driver and bit storage com-
partment.
LOCATION OF FEATURES AND CONTROLS
See Figure 1.
ADAPTER
POWER CORD
SPEAKER
RADIO CHARGER AND HP962 DRILL-DRIVER
See Figure 2.
Figure 2 is a view of your radio charger with the HP962
Drill-Driver on the tool rest with one battery pack in charger
and the other battery pack installed in drill-driver.
BATTERY PACK
FEATURES
FM ANTENNA
CHARGE
INDICATOR
LIGHT (LED)
BATTERY PORT
AM/FM
BAND KNOB
Page 7
UNPACKING
Your radio charger has been shipped completely assembled.
Inspect it carefully to make sure no breakage or damage has
occurred during shipping. If any parts are damaged or
missing, contact your nearest Ryobi Authorized Service
Center to obtain replacement parts before attempting to
operate radio charger.
WARNING:
If any parts are missing, do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
STORAGE
COMPARTMENT
TOOL REST
kH z
ON / OFF AND
TUNING KNOB VOLUME CONTROL KNOB
kH z
AM/FM
DIAL
AM/FM
RADIO CHARGER
Fig. 1
Fig. 2