Baby Jogger Stroller Assembly Instructions Manual page 5

Canopy
1
To attach canopy to frame, simply
slide canopy axle into the top hole of
the bracket on the frame, until you
hear it click into place. The bottom
hole can be used for accessories,
and they should be inserted into the
bracket the same way as the canopy.
6
2
To remove the canopy, stand facing the
stroller and press the bracket buttons
with index finger while removing the
canopy from the bracket.
Seat
1
2
Snap seat to frame, Secure top of seat around
starting with the top snap frame with Velcro tab, after
closest to the handle, and
snapping the webbing to the
working your way down
frame underneath.
to the frame behind the
front wheel.
4
Secure safety
straps to both
sides of the
5
Be sure that fold strap rings are secured
frame before use.
to the frame before use.
Warning: always
be sure the safety
strap is securely
snapped onto the
frame before using
stroller!
3
Secure seat straps around the
bottom of the frame, behind
the front wheel. Thread one
seat strap through the D ring of
the other strap, and fasten both
Velcro sides firmly together.
To fold stroller: Remove child
from seat. Unsnap safety straps
from frame and pull upwards on
the fold strap with a gentle tug.
7