Table of Contents
Advertisement
When you use the touchscreen panel, you must follow these instructions:
• Follow normal operation procedures and use proper tools to avoid the damage caused by user errors.
• Touch the panel with your finger to assure normal operation. Any sharp edged or hard objects are prohibited.
Avoid applying excessive activation force or sudden impact on the panel surface.
• Prevent any kind of adhesive applied on the surface.
• For more information on cleaning the screen surface, see
instructions.
Cleaning the touchscreen
1. Power off the smart display, and disconnect all cables.
2. Use a soft lens brush or an air blower to remove any dust or dirt on the glass and on the
edges of the touchscreen.
3. Spray a small amount of water or glass cleaner onto a lens cleaning cloth, and wipe the
touchscreen gently to remove fingerprints.
• Handle your smart display with care when cleaning. Do not rub the touchscreen with force or with hard
objects to avoid scratches.
• Keep the smart display away from direct sunlight and all kinds of solvents.
• Do not use any abrasive cleaner that contains acetone, butanone, cyclohexanone, or alcohol.
• Spray water onto a lens cleaning cloth instead of the screen surface directly. If water is sprayed onto the screen
by accident, wipe it off with a dry, soft lint-free cloth immediately to protect your smart display from water
damage.
Navigating the menu
• Tap
to return to the main Home screen under any circumstances.
• Tap
to return to the previous screen or to exit the current application (available in some
applications).
• Tap
from Home to access all the installed applications and widgets. Tap the
all applications; tap the
vary depending on the product supplied for your region.
• (If available)Tap
screen or application.
• Tap
>
Settings
• Depending on the current situation, enable a function by checking the checkbox or slide the
on/off switch to
ON
Disable a function by unchecking the checkbox or slide the on/off switch to
Screen timeout
If the smart display is powered on and is not being operated by touching the screen for a while,
the screen timeout will be activated. The touchscreen backlight will go off to conserve power
and the touchscreen is locked. The system stands by for user input. Press the Power button to
switch on the smart display again.
tab for all widgets. Available applications and widgets may
WIDGETS
on the top-right corner of the screen for more options for the current
for device settings.
(
).
Cleaning the touchscreen on page 21
for cleaning
tab for
APPS
(
).
OFF
Basic operations
21
Advertisement
Table of Contents
