Table of Contents
Advertisement
USE OF THIS PRODUCT AND PARTICIPATION IN THE SPORT OF
STAND UP PADDLEBOARDING INVOLVES INHERENT RISKS OF
INJURY OR DEATH.
Introduction
At RAVE SUP we live & breathe stand up paddle boarding. We're all about
creating quality constructed SUP boards, paddles, and accessories that
embrace the SUP lifestyle.
Set Up
RAVE SUP boards include a removable fin, elastic cargo strap or net
(depending on model) and self-venting pressure relief valve. It is important
to understand how to properly install and remove these parts to prevent
damage to the equipment.
Self-Venting Plug
1. RAVE SUP boards come with a self-venting
plug installed. The vent plug allows the board to
1.
regulate pressure inside the board due to
changing temperatures. CAUTION: Keep
board away from prolonged exposure to
direct sunlight or extreme heat when not in
use in order to prevent potential damage to
2.
the deck pad and other surfaces.
2. The vent plug is fully installed by the factory.
There is no need to touch it. If it should happen
to come loose , hand tighten with a 5/8" socket.
Very lightly turn the plug clockwise until snug.
IMPORTANT: DO NOT OVER TIGHTEN. OVER
TIGHTENING WILL CAUSE THE THREADS
TO STRIP
4
Advertisement
Table of Contents
