Specifications; Warranty - Russound Complement R10DT User Manual

Complement series 10” powered subwoofer
Hide thumbs Also See for Complement R10DT:
Table of Contents

Advertisement

SPECIFICATIONS

Driver Complement and Enclosure:
Frequency Response:
Crossover Frequency (-3dB):
Power requirements:

WARRANTY

The Russound R10DT is fully guaranteed for two (2) years from the date of purchase against all defects in materials
and workmanship. During this period Russound will replace any defective parts and correct any defect in workman-
ship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according
to its written instructions. If service is necessary, it must be performed by Russound. The unit must be returned to
Russound at the owners expense and with prior written permission. Accidental damage and shipping damage are not
considered defects under the terms of the warranty. Russound assumes no responsibility for defects resulting from
abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. Damage to
or destruction of components due to improper use voids the warranty. In these cases the repair will be made at the
owners expense. To return for repairs, the unit must be shipped to Russound at the owners expense, along with a
note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of
resilient material to protect the unit from damage in transit.
Russound sells products only through authorized Dealers and Distributors to ensure that customers obtain proper
support and service. Any Russound product purchased from an unauthorized dealer or source, including retailers,
mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale
of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the
applicable product.
Front-firing 10" long throw woofer with dual ports
Voice Coil:
38mm dia.
28Hz to 160Hz +/- 3dB
Amplification:
120 watts continuous power into 4 ohm load
THD+N:
1.0%
60Hz @ Min., 160Hz @ Max.
Audio Input:
RCA Line Level and Speaker Level
120VAC 60Hz 1.25A
Molded 2 terminal power cord
Dimensions:
14.0" W x 16.3" D x 17" H (35.6 x 41.5 x 43.2 cm)
Weight:
36.7lbs. (16.6kg.)
R10DT SUBWOOFER
7

Advertisement

Table of Contents
loading

Table of Contents