Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Russound Complement SUB105
Summary of Contents for Russound Complement SUB105
- Page 1 Complement SUB105 ® Powered Subwoofer Instruction Manual...
-
Page 2: Safety Precautions
It is not necessary to make any other changes. If you have any ques- not fall and liquids are not spilled into the enclosure through the tions, call Russound at 603.659.5170. openings. 16. Damage Requiring Service - The appliance should be serviced by Safety Instructions qualifi... -
Page 3: Product Description
The SUB105 is ideal for use in home theater and stereo seated ear height on a sturdy, nonresonant platform. music systems. The perfect match for Russound Comple- Play music with ascending and descending bass notes, ment LCR7 on-wall speakers, it can also be used with such as a jazz recording with a walking bass line. -
Page 4: Installation
INSTALLATION Rear Panel SPEAKER LEVEL OUT – Pass-through connectors LINE-LEVEL INPUT – RCA connectors for stereo for main left and right speakers when speaker- line-level signals from a preamplifi er or receiver. level input is used. Binding posts accept banana LFE INPUT –... - Page 5 INSTALLATION Front Panel (grille removed) POWER INDICATOR – Lights up amber when the CROSSOVER FREQUENCY CONTROL – Selects the SUB105 amplifi er is in standby mode and green frequency for the low-pass fi lter within the range when fully on. of 50 to 200 Hz.
- Page 6 INSTALLATION LFE input Connections The low-frequency effects (LFE) input is for use when The SUB105 gives you multiple options for connecting the LFE or subwoofer output on the home theater to your audio system. Choose the option that works best receiver or processor is turned on.
-
Page 7: Line-Level Input
INSTALLATION Line-level input Note: When the LFE or line-level input is connected to an audio system powered by a different electri cal This input is for use when the receiver’s or processor’s circuit from the one used to power the SUB105, a LFE or subwoofer output is turned off, or when the ground loop may result. - Page 8 INSTALLATION Connections (continued) RJ-45 Using T568A Wiring Standard input RNET A/V The RNET A/V balanced stereo line-level input allows connection to the source equipment via a CAT-5 cable. This input is an 8-pole RJ-45 connector that uses Rus- sound’s RNET A/V technology. It connects to either an At the source end, plug the connector into the RNET RNET A/V source output or an RAVE1 RNET A/V Encoder A/V jack on the source or the RNET A/V Encoder.
- Page 9 INSTALLATION Speaker-level input red positive (+) terminal and the black wire to the black negative (–) terminal. This input is for use when you need to send an amplifi ed Note: Some speaker cables have other ways of desig- signal to the SUB105, such as when no line-level signal nating polarity.
- Page 10 INSTALLATION Power After making the audio connections, check the voltage switch on the back of the SUB105 to make sure it is set to the correct voltage for your area. Insert one end of the supplied power cable into the IEC receptacle next to the voltage switch and the other end into a live power receptacle.
-
Page 11: Specifications
Russound. Damage to or destruction of components due to improper use voids the warranty. In these cases the repair will be made at the owner’s expense. To return for repairs, the unit must be shipped to Russound at the owner’s expense, along with a note explaining the nature of the service required. - Page 12 Tel 603.659.5170 • Fax 603.659.5388 www.russound.com Technical Support: tech@russound.com 28-1282 08/10/07 Copyright © 2007 Russound. All rights reserved. All trademarks are the property of their respective owners. Specifi cations are subject to change without notice. Russound is not responsible for typographical errors or omissions.