DISASSEMBLY AND REASSEMBLY
3-35) Electric Box
Part Name
PBA Main
PBA INVERTER
How To Do
1. Remove the 3 screw attached to the
upper left and right Case PCB Panel
with a phillips screwdriver(+).
2. Disengage all housing connectors
from the main PCB.
Before doing the above,
make sure that the unit is
unplugged.
CAUTION
3. Press the lower locking hook down
and remove the Main PBA by pulling
it out.
(Refer to the picture)
1. Remove the INVERTER PBA by lifting
the upper part of the hook up.
53
Descriptive Picture