4K @50/60Hz HDMI 2.0 signals with compliance to HDCP 2.2. They are ideal in a variety of situations from digital signage, residential, conference rooms and education establishments. SY Electronics Ltd., 7 Worrall Street, Salford, Manchester, M5 4TH, UK Tel: +44 (0)161 868 3450 – Fax: +44 (0)161 868 3459 - Web: sy.uk...
Lights when a HDMI signal is detected at the HDMI Input connector Numbered LEDs Indicates that a HDMI signal is being sent from the indicated HDMI output Service USB Used to install new firmware updates (not available on SY-HS12-18G) EDID Switch Select between EDID Pass mode or 1080p mode www.sy.uk...
Rear Panel Item Description 5V DC for SY-HS12-18G and SY-HS14-18G Power Input 12V DC for SY-HS18-18G HDMI IN HDMI signal input connector Numbered HDMI Connectors HDMI output connectors www.sy.uk V1.0...
Output 1 is not 4K capable, then the splitter will choose the best fit EDID from all four outputs to ensure that all displays can show an image. 1080p mode - The input EDID will be set to 1080p. www.sy.uk V1.0...
Repair of the equipment should only be carried out by authorised qualified professionals as these products contain sensitive devices that may be damaged by any mistreatment. Only use these products indoors and in a dry environment. Do not allow any liquids or harmful chemicals to come into contact with these products. www.sy.uk V1.0...
Damage to the product due to incorrect usage or storage Damage caused by unauthorised repairs Damage caused by mistreatment of the product Please direct any questions or problems you may have to your local dealer before contacting SY Electronics. www.sy.uk V1.0...
Need help?
Do you have a question about the SY-HS14-18G and is the answer not in the manual?
Questions and answers