Wireless Optical Mouse
Quick Start Guide
LMWLOS11
LMWLOP11
LMWLOT11
LMWLOR11
LMWLOG11
LMWLOC11
Thank you
for purchasing your new Logik Wireless Optical Mouse. Please
familiarise yourself with this Quick Start Guide to enjoy all the exciting features.
1
1
Unpacking
Remove all packaging from the unit. Retain the packaging. If you
dispose of it, please do so according to the local regulations.
The following items are included:
RF Receiver
(PN.: MRN)
Wireless Optical Mouse
Quick Start Guide
LMWLOS11
LMWLOP11
LMWLOT11
LMWLOR11
LMWLOG11
LMWLOC11
Mouse
AAA Batteries x 2
Quick Start Guide
(PN.: LMWLOS_P_T_R_G_C11-001)
If items are missing or damaged, please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
2
2
Installing the Batteries
2
nd
1
st
Battery Cover
Battery X 2
Slide the battery cover o and insert 2 x AAA batteries. Close the battery
cover. Ensure batteries are inserted with the correct polarity.
3
3
Connect the USB Receiver
Open the battery cover
Plug the RF receiver directly into
then take the RF receiver
your computer's USB port.
out.
4
4
Activate the Wireless Mouse
1. Switch the ON/OFF button to
ON/OFF Switch
power on the mouse.
2. If the mouse does not response,
Connect Button
press the Connect button to
activate the connection between
the mouse and the RF receiver. If
the mouse does not work after 10
seconds, pair them again. (The
receiver has auto pairing function.)
The LED indicator on the mouse
flashes steadily when it is in pairing
mode and stops blinking when it is
sucessfully paired with the
recceiver.
When the batteries' power of the
mouse is low, the Low Power
indicator will start to flash.
Need help?
Do you have a question about the LMWLOS11 and is the answer not in the manual?
Questions and answers