RF Technology HELP ALERT User Manual page 14

General Information
LED Sequence
10-15 sec)
-----P---- • ------------------
---- • ------------------
---- • ------------------
---- • ------------------
---- • ------------------
------------- --------------
or
------------- --------------
•••••••••••••••••••••••
• • • • • • • •
P•P•P•P•P• •
P•P•P•P•P•
• • • • • • • • • • • • •
Page 12 of 28
Meaning
(over
Alarm is escalated to
MassNote triggered
• -----
• ----- Device is in alarm
Device is in
• -----
MassNote alarm
Device Alarm has
• -----
been acknowledged
MassNote Alarm has
• -----
been acknowledged
Device is not
receiving updates
from system server
Rapid red blinking –
Firmware is being
updated
Red-green-red
flashing – Device
configuration is being
updated
User has forced the
Device to check in
Forced Device
check-in not reaching
system server
Device Blinking
Orange once a
second – Device was
reset to manufacturer
defaults
How to Respond
The sequence was
started by user
holding both side
buttons for > 2
second during alarm
No action required
No action required
No action required
No action required
Attempt to move
within range of the
network
Wait until finished
before use
Wait until finished
before use
Sequence was
started by user
pressing button five
times
Attempt to move
within range of the
network, or retry
Exchange with
supervisor
HELP ALERT Fob User Guide
0510-0543-B