Advertisement
V I D E O
X T R E M E
T
he Video Xtreme VX-6c projector fam-
ily is Runco's ultimate achievement in
video projection design and performance.
Created for the very finest home theater
applications and true connoisseurs of big
screen picture perfection, these flagship
projection systems are not for the faint of
heart, but rather for those who will accept
no compromise.
Runco offers four distinct versions of the
VX-6c to meet the needs of any top qual-
ity installation requirement:
• The VX-6c 720P system offers high
definition resolution in a 16:9 format,
while providing multiple aspect ratio
selection in addition.
• The VX-6c 960P system provides even
greater resolution at all aspect ratios.
• The VX-6c 1024P system yields the
ultimate resolution by employing every
available pixel for maximum picture
clarity and brightness.
• And finally, the VX-6c 1024P 2.35
aspect ratio system also makes the
maximum resolution fully available,
and does so even in the very wid-
est CinemaScope 2.35:1 aspect ratio
— the only consumer video projection
system available with such awesome
capability!
These state-of-the-art projectors utilize
Texas Instruments' most advanced Dark
Metal Process DMD™ chipsets with an
impressive 1280 x 1024 native resolution
in a 3-chip array. When combined with
the powerful 1.2 kilowatt Xenon lamp the
results are unparalleled brightness and stel-
lar high-resolution images on a variety of
screen sizes. Runco has engineered a lamp
intensity control system as well, so the
lamp can operate at lower output levels
when used with smaller screens to pre-
serve maximum black level performance.
In addition to the unprecedented versatil-
ity offered by the VX-6c projector family,
all four include Runco's award winning
VHD Ultra Video Controller for outstand-
ing video processing, scaling and aspect
ratio control.
The Runco VX-6c projector family features
not only most technologically advanced
design ever offered, but includes horizon-
tal and vertical lens shift for maximum
installation flexibility even in the most
difficult situations. The limited edition
VX-6c will only be found at the most
exclusive addresses.
Call factory for more specific information on export specifications. Specifications are subject to change without notice. Optional ceiling bracket available.
D L P
P R O J E C T O R S
™
VX-6c PROJECTOR SPECIFICATIONS:
Projector Type:
Digital Light Processing™ (DLP™),
3-chip, 0.9" DMD™ — Dark Metal
Process
1280 x 1024
Native Resolution:
Aspect Ratios:
Determined by supplied processor
NTSC, PAL
Video Standards:
DTV Compatibility:
480p, 720p, 1080i, 1080p
Scan Frequency:
Horizontal: 15 – 120 KHz
Vertical: 24 – 120 Hz
Picture Size
Recommended Width: 84 – 360 in.
Maximum Width: 500 in.
(16:9 Screen):
Throw Distance:
Lens Option 1: Zoom 1.5-2.2 x width
Lens Option 2: Zoom 2.2-4 x width
Lens Option 3: Zoom 4-7 x width
Lens Option 4: 0.8 x screen width
(for rear-screen applications)
ANAMORPHIC CINEMA LENS
ATTACHMENTS:
VX-6c @ 720P: None;
VX-6c @ 960P: 1.33;
VX-6c @ 1024P: 1.42;
VX-6c @ 1024P
w/2.35 Aspect Ratio: 1.9
Horizontal and
Horizontal offset varies per lens,
up to 80%
Vertical Offset:
Vertical offset: varies per lens,
up to 130%
VHD ULTRA CONTROLLER SPECIFICATIONS (Included with the VX-6c):
Aspect Ratios:
Anamorphic, Letterbox,
4:3 (on either 16:9 or 4:3 screens)
Video Standards:
NTSC/PAL
Outputs:
Native Resolution: 720P, 960P,
1024P, and 1024P anamorphic
HD Pass-through: Up to 1080p
(1) Composite, (1) S-Video,
Inputs:
(1) Component, (1) Pass-through
Infrared (with discrete on/off,
Control Options:
aspect ratio and source selection),
RS-232, and Front Panel
Screen Trigger/
(2) 12V DC, 1/8A
Masking Outputs:
Bandwidth:
Video inputs: 5.5 Mhz,
Pass-through: 100 Mhz
*ANSI Lumen specification:
This is the typical projector luminosity (brightness) specification found in most sales literature. This measurement is included in
RUNCO literature to allow for direct comparison with other manufacturer's projectors. These measurements can be taken at 9,000
to 13,000ºKelvin to get expected performance data when the projector is used in professional, commercial, and industrial displays.
CSMS Home Theater Calibration ANSI Lumen Specification:
These measurements are taken from the projector as set up in a home theater environment. The projector is calibrated to ISF
specifications including setting the color temperature to 6500ºKelvin, the standard for reproducing video.
CSMS Home Theater Calibration foot-Lambert (fL) Specification:
This is the unit of measurement used in commercial movie theaters to express image brightness. The Society of Motion Picture
and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate (with-
out film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters
using DLP™ technology. The foot-Lambert is dependant on screen size, screen gain, and projector light output.
All measurements are made at RUNCO to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650
SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD, and a Da-Lite 1.5 gain, 100-inch wide screen.
The projector is calibrated to a color temperature of 6500º Kelvin and has a minimum of 150 hours of usage.
A N D
P F P
C O N T R O L L E R S
™
Light Output:
CSMS* Specifications: Home
Theater Calibration: 3488-5385
ANSI Lumens; 65.4-101.3 Foot-
Lamberts (fL); Up to 6000 ANSI
lumens (All light output values are
variable depending on lamp watt-
age output adjustment setting).
CSMS* Contrast Ratio: 134:1 – 140:1;
Contrast Ratio:
1000:1 ANSI
1.2kW Xenon lamp, adjustable from
Lamp:
800W to 1.2kW
Lamp Life:
1000 hours @ 6500º Kelvin
Inputs:
Projector: (1) RGB/Component,
(1) DB 15-pin
Controller: (1) Composite,
(1) S-Video, (1) Component, and
(1) Pass-through
Memories:
100 discrete memories
See Controller for Specifications
12V Output:
Power Requirements:
220-240V AC, 50/60 Hz, 1700W
Operating Environment: 41° – 95° F, (5° – 35° C), 20% – 85%
Humidity (non-condensing)
Dimensions (w/out feet):Width: 28 9/10 in. (734.00 mm)
Depth: 31 3/5 in. (802.60 mm)
Height: 13.0 in. (330.20 mm)
Weight: 181 lbs. (82.3 kg)
(without lens)
Regulatory Approvals: Complies with FCC, CE, C-Tick
Limited Warranty:
Projector: (2) Two years parts and
labor from the date of delivery to
the end user.
Lamp Warranty: 1000 hours or (6)
six months, which ever comes first.
Power Requirements:
100 – 240V AC (auto sensing)
50/60 Hz, 15W
Operating Environments: 41°– 95° F, (5° – 35° C),
0%– 90% Humidity (non-condensing)
Dimensions:
Width: 17 1/2 in. (444.50 mm)
(w/out feet)
Depth: 16 in. (406.40 mm)
Height: 3 1/2 in. (88.90 mm)
Weight: 16 lbs. (7.3 kg)
Included Accessories: Rack mounting brackets
Regulatory Approvals: Complies with FCC Class B, CE,
C-Tick
Limited Warranty:
(2) Two years parts and labor from
the date of delivery to the end user.
Tel: 510-324-7777 • Fax: 510-324-9300
Runco International
®
2900 Faber Street
Union City CA 94587
www.runco.com
12/03
Advertisement
