Advertisement
Quick install Guide
Fax Extension for the Cisco SPA122 ATA
Installing your Cisco SPA122 ATA
• Connect your fax machine to the PHONE 1 port on the back of your Cisco SPA122 ATA.
– If you purchased a 2nd-Port Fax Plan, connect that fax to the PHONE 2 port.
• Disconnect the power adapter on your Cisco ATA and reconnect it after a few seconds.
• You are now ready to place fax calls.
Analog Phone, Fax
or Paging System
NOTE: If you do not have a router, you can connect your Cisco SPA122 ATA directly into a broadband modem. Please refer to the
Cisco SPA122 ATA Quick Start Guide at
© 2012. The 8x8, Inc. logo is a registered trademark of 8x8, Inc. 8x8, Inc. is a publicly traded company. PM484/312
Fax Machine
Computer or
(2nd-Port Fax Plan Only)
Laptop
http://www.8x8.com/Support/BusinessSupport/Documentation.aspx
Internet Connection
Power Adapter
(Router or Broadband Modem)
NASDAQ: EGHT
www.8x8.com
on how to configure this.
The Champion
For Business
Communications
Advertisement
