LECAI Science And Technology LC Easyjet-16W Reference Manual
  1. Manuals
  2. Brands
  3. LECAI Science And Technology Manuals
  4. Printer
  5. LC Easyjet-16W
  6. Reference manual

LECAI Science And Technology LC Easyjet-16W Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for LECAI Science And Technology LC Easyjet-16W

  • Page 2: Important Notice

    Important Notice Copyright © Zhengzhou LECAI Science And Technology Co., Ltd. LECAI and LOCOR is trademark of Zhengzhou LECAI Science And Technology Co., Ltd. No Part of this manual may be copied or distributed, transmitted, transcribed, stored in a retrieval system,...

  • Page 3: Table Of Contents

    LC Easyjet-16W/18S User Manual V13GZ.1 Content Important Notice .................................. 2 Foreword ..................................5 Power Safety ..............................5 Operation Notes ............................6 Installation location and Using Environment Note ..................6 Disposal of Cartridge and Cautions ......................6 Installation ................................... 7 Overview ..............................7 Installation ..............................
  • Page 4 LC Easyjet-16W/18S User Manual V13GZ.1 3.1.7.4 Reset Menu ..........................30 Computer IP Address Setup ............................30 Maintop Installation & Setup ............................. 33 Maintop Software Installation ........................33 Printer Set Up ............................36 Maintop Application ..........................42 Printer Calibration ............................ 53 Daily Maintenance ..............................

  • Page 5: Foreword

    LC Easyjet-16W/18S User Manual V13GZ.1 1. Foreword Zhengzhou LECAI Science And Technology Co., Ltd. Thanks for purchasing this printer of We write this specification for your convenience of using this machine. Installed steps and system operation are mentioned here. In order to maximize the effect of this specification, you may be under the directory to search related topic.

  • Page 6: Operation Notes

    LC Easyjet-16W/18S User Manual V13GZ.1 into a wall should not exceed the total amperage rating of the wall socket. Don’t try to repair the printer, if you encounter some problems, please seek for the maintenance technicians. For the safety of people and machines, please make sure take the earth lead and the maintenance technicians would tell you the requirement.

  • Page 7: Installation

    LC Easyjet-16W/18S User Manual V13GZ.1 Ink should be stored cool store, avoid direct sunlight. 2 Installation This section refers to the printer structure and assembly. 2.1 Overview Front View No. Name No. Name Upper Cover Left Media Feeding Unit Back Cover...
  • Page 8 LC Easyjet-16W/18S User Manual V13GZ.1 Right Decorating Part Beam Temperature Controller Bracket Left Media Take up Unit Right Front Cover Left Stand Metal Gasket Feeding Unit Left Loading Bracket Right Media Feeding Unit Left Front Shell Slide Bar Left Decorating Part...

  • Page 9: Installation

    LC Easyjet-16W/18S User Manual V13GZ.1 Left Right No. Name Name Power Interface & Switch Temperature Controller Heater Switch Network Cable Interface Bail Assembly Ink Cartridge Assembly 2.2 Installation 2.2.1 Unpack the Package 1) Please check the package before opening, ensuring no damage, break, or any theft...
  • Page 10 LC Easyjet-16W/18S User Manual V13GZ.1 2) Please check the contents according the packing list attached in the package, make sure all the items are inside.
  • Page 11 LC Easyjet-16W/18S User Manual V13GZ.1 Notice: After open the carton, quickly move the packaging materials (cartons, vinyl bags, foam styrene, etc.) out of the reach of children or dispose of them appropriately. 3) Check the accessories and keep in a safe place to avoid damage or getting lost.

  • Page 12: Assemble The Stand

    LC Easyjet-16W/18S User Manual V13GZ.1 2.2.2 Assemble the Stand Assemble the Stand based on the following illustration. No. Name Name Metal Gasket Vertical Stand Feeling Unit Right Loading Bracket Screws Waste-ink Bottle Holder Feeding Unit Slide Bar Horizontal Stand Feeling Unit Left Loading Bracket...

  • Page 13: Load The Cartridge

    LC Easyjet-16W/18S User Manual V13GZ.1 b.Lay down printer body on stands and remove membranes. c.Install the printer body to the stands and fix by four screws at each side. d.Confirm that each component is fastened firmly by gently shaking the stands.

  • Page 14: Install The Carriage

    LC Easyjet-16W/18S User Manual V13GZ.1 2.2.5 Install the Carriage 2.2.5.1 Structure of Carriage Name Name Carriage Board Print Head Cover Connection Assembly Epson DX5 Print Head Carriage Regulator Carriage Pedestal Damper Holder Carriage Pedestal Holder Ink Damper...

  • Page 15: Load The Print Head

    LC Easyjet-16W/18S User Manual V13GZ.1 2.2.5.2 Load the Print Head a. Dismantle the fixer for driving carriage. b. Connect the power cable to LECAI printer, turn on the printer and then the driving carriage starts to self-checking and moves back to the service station automatically.

  • Page 16: Fix The Damper

    LC Easyjet-16W/18S User Manual V13GZ.1 and the print head, the correct connection is illustrated as below: f. When make sure the data wires are well connected, please fix the print head to the bracket by the three screws dismantled before and then fix the print head cover.
  • Page 17 LC Easyjet-16W/18S User Manual V13GZ.1 Notice: Connect the ink dampers to the corresponding connectors of print head. Do not overexert to avoid damage to the print head. Make sure the ink dampers are well connected to the print head without air leakage.

  • Page 18: Maintenance Station

    LC Easyjet-16W/18S User Manual V13GZ.1 2.2.6 Maintenance Station Name Name Flush Box Cover Draw Spring Flush Box Sponge Inner Housing Flush Box Middle Housing Wiper Outer Housing Wiper Solenoid Valve Return Spring Wiper Holder Maintenance Station Sponge Maintenance Capper Maintenance Station Box...

  • Page 19: Media Loading

    LC Easyjet-16W/18S User Manual V13GZ.1 2.2.7 Media Loading a. Firstly Install the scroller of the media into left media pay-off device and fix it and then connect the scroller to right part in the same way. b. Lift up the media fixer handle and turn the scroller by hand and wind up several turns of roll media.

  • Page 20: Panel Menu Set Up

    LC Easyjet-16W/18S User Manual V13GZ.1 3.1 Panel Menu Set up 3.1.1 Main Menu Overview Start POS Print begin position setup. Media Media Feeding. Print Nozzle status test. Option Direction, Start POS, Fant, Address, Spurt. Clean Clean and maintain the print head automatically.

  • Page 21: Media Menu

    LC Easyjet-16W/18S User Manual V13GZ.1 Long press “Left” to make the carriage move to the left. Left Long press “Right” to make the carriage move to the right. Right Press “OK” to save your setting. Press “Cancel” to cancel your setting and return to Set Menu.

  • Page 22: Print Menu

    LC Easyjet-16W/18S User Manual V13GZ.1 3.1.4 Print Menu Press “Print ” in Main Menu to print a nozzle testing pattern, as below: Notice: After testing, it will print out 4 groups of lines (C/M/Y/K) in the media, for checking the...

  • Page 23: Dir Menu

    LC Easyjet-16W/18S User Manual V13GZ.1 Print direction. Start POS Print begin position setup. Fant Print table suction fan. Addr Address (Default). Spurt Printhead spurt. Back Back to Main menu. 3.1.5.1 Dir Menu Press “Dir ” in Main Menu to enter its submenu, as below:...

  • Page 24: Start Pos Mune ( 3.1.2)

    LC Easyjet-16W/18S User Manual V13GZ.1 Press “Unidir” for select the print direction to unidirection. Unidir Press “Bidir” for select the print direction to bidirection. Bidir Back Back to Option Menu 3.1.5.2 Start POS Mune ( 3.1.2) 3.1.5.3 Fant Mune Press “Fant” to enter its submenu, as below: Press “Inc”...

  • Page 25: Clean Menu

    LC Easyjet-16W/18S User Manual V13GZ.1 Press “Inc” to increase or close the spurt strength. Press “Dec” to decrease or close the spurt strength. Press “OK” to save your setting. Press “Cancel” to cancel your setting and return to Option Menu.

  • Page 26: Function Menu

    LC Easyjet-16W/18S User Manual V13GZ.1 3.1.7 Function Menu Press “Function” to enter its submenu, as below： 3.1.7.1 Print Menu ( 3.1.4) 3.1.7.2 Clean Menu Press “Clean” to enter its submenu, as below：...
  • Page 27 LC Easyjet-16W/18S User Manual V13GZ.1 3.1.7.2.1 Pump Menu Press “Pump” to enter its submenu, as below： Notice: After press the “Pump”, the pump will work and fill ink until you press the “Stop”. When first time do the ink-filling can use this function to fill ink. Press “Stop” will show below：...
  • Page 28 LC Easyjet-16W/18S User Manual V13GZ.1 3.1.7.2.2 Clean Menu (Disable) 3.1.7.2.3 CleanHead Menu ( 3.1.6) 3.1.7.2.4 Flush Menu Press “Flush” to enter its submenu, as below： Notice: After press “Flush” the carriage will go to the flush box spit ink from the nozzle until you press the “Stop”, after stop please check the status of nozzle.

  • Page 29: About Menu

    LC Easyjet-16W/18S User Manual V13GZ.1 3.1.7.2.5 Cap Menu Press “Cap” to enter its submenu, as below： Notice: After press “Cap”, the carriage will back to maintenance station. After printing job, please check and make sure the carriage already back to the maintenance station, and make sure the maintenance cap completely close the nozzle.

  • Page 30: Reset Menu

    LC Easyjet-16W/18S User Manual V13GZ.1 Notice: This is the machine version information. 3.1.7.4 Reset Menu Press “Reset” to enter its submenu, as below: Notice: Users are not recommend to reset printer. 4 Computer IP Address Setup This section explains how to setup the computer IP address.
  • Page 31 LC Easyjet-16W/18S User Manual V13GZ.1 1. Right click “My Network Places” icon and then select Properties, the screen below is displayed: 2. Right click “Local Area Connection” and then select Properties, the screen below is displayed: 3. Double Click “Internet Protocol (TCP/IP)”option, the screen below is displayed:...
  • Page 32 LC Easyjet-16W/18S User Manual V13GZ.1 4. Input IP address 196.12.0.188, and then click Subnet mask. 5. After click “OK”, the IP address setup procedure is completed.

  • Page 33: Maintop Installation & Setup

    LC Easyjet-16W/18S User Manual V13GZ.1 5 Maintop Installation & Setup This section explains how to install Maintop software, how to set up maintop printer and related parameters. Maintop is compatible with Win 7, Windows XP, Window 2000, Win98 etc. 5.1 Maintop Software Installation 1.
  • Page 34 LC Easyjet-16W/18S User Manual V13GZ.1 Notice: If the screen above is not displayed, please open the “maintop (E:)”, and then double click the “SETUP” in the screen below to enter the “MAINTOP DTP” screen. 3. Click “MAINTOP DTP”, the screen below is displayed. Then click “OK”.
  • Page 35 LC Easyjet-16W/18S User Manual V13GZ.1 4. Choose “Restart immediately” and then click “Close”. After restart your PC, the maintop software installation is completed.

  • Page 36: Printer Set Up

    LC Easyjet-16W/18S User Manual V13GZ.1 5.2 Printer Set Up Plug maintop dongle into the USB connector of your PC. Maintop Dongle in “Start→Programs→MainTop” to enter the maintop software. 2. Click 3. Put the Driver CD to the DVD RW.
  • Page 37 LC Easyjet-16W/18S User Manual V13GZ.1 4. Copy all the files as below: 5. Paste all the file to the PC desktop or hard disk.
  • Page 38 LC Easyjet-16W/18S User Manual V13GZ.1...
  • Page 39 LC Easyjet-16W/18S User Manual V13GZ.1 6. Click “File→Printer Setup” in the screen below. 7. Click “Install” option in the following screen.
  • Page 40 LC Easyjet-16W/18S User Manual V13GZ.1 8. Click “Custom” option in the following screen.
  • Page 41 LC Easyjet-16W/18S User Manual V13GZ.1 9. Find the Maintop Driver location where you pasted before and select the “xinli.inf” file and then click “Open”. 10. The screen returns to the “Printer Setup”. Click “Set As Default Printer” to set the printer model you selected as the default printer and then click “OK”.

  • Page 42: Maintop Application

    LC Easyjet-16W/18S User Manual V13GZ.1 5.3 Maintop Application This section explains how to use the Maintop software and how to set up the related parameters before printing the image. 1. The screen returns to “MainTop DTP V5.3C1-LECAI” as below. 2. Click “File→New” in the screen below.
  • Page 43 LC Easyjet-16W/18S User Manual V13GZ.1 3. The following screen is displayed.
  • Page 44 LC Easyjet-16W/18S User Manual V13GZ.1 4. Click “OK”, the screen below is displayed. 5. Click import image icon to select your job, the screen below is displayed:...
  • Page 45 LC Easyjet-16W/18S User Manual V13GZ.1 6. Click “Open”, the screen below is displayed.
  • Page 46 LC Easyjet-16W/18S User Manual V13GZ.1 7. Right click the image and select “Frame Attribution” option to set up the image size, the screen below is displayed. 8. After input your size, must click the “Constrain Proportion” option, and then click “OK”:...
  • Page 47 LC Easyjet-16W/18S User Manual V13GZ.1 9. Press “Ctrl+D” can copy and paste the image at the same time, the screen below is displayed. 10. Select all images and then click “Show Alignment & Distributing Panel” icon to align the image, the screen below is displayed:...
  • Page 48 LC Easyjet-16W/18S User Manual V13GZ.1 Select all the image and then right click Group, Ctrl + D can copy and paste this group.
  • Page 49 LC Easyjet-16W/18S User Manual V13GZ.1...
  • Page 50 LC Easyjet-16W/18S User Manual V13GZ.1 11. Click “Show Metric Panel” icon to setup the image position, the screen below is displayed:...
  • Page 51 LC Easyjet-16W/18S User Manual V13GZ.1 12. Click “Print” icon , the screen below is displayed:...
  • Page 52 LC Easyjet-16W/18S User Manual V13GZ.1 13. Click “Properties”, the following screen appears: 14. Click “OK”, the following screen appears: 15. Click the “Maintop Printing Management System” icon , the...

  • Page 53: Printer Calibration

    LC Easyjet-16W/18S User Manual V13GZ.1 following screen appears. Notice: If it does not print, please select “untitled.tpf” and then click icon to start printing work. The whole procedure of Maintop application has been explained above. 5.4 Printer Calibration This section explains how to use the calibration software.
  • Page 54 LC Easyjet-16W/18S User Manual V13GZ.1 3. Click “Connect” to enable the tool interface, the following screen appears: About the Tool interface function, refer to the following illustration:...
  • Page 55 LC Easyjet-16W/18S User Manual V13GZ.1 FUNCTION Printer IP Address 196.12.0.25 PC IP Address 196.12.0.188 IP Address Set up 4 Pass Bidirection Calibration 6-12 Pass Bidirection Calibration 4 Pass Bidirection Calibration Parameter 6-12 Pass Bidirection Calibration Parameter Bidirection Calibration Save Step Calibration...
  • Page 56 LC Easyjet-16W/18S User Manual V13GZ.1 4. Bidirection Calibration a) Click 4 pass “Align”, the printer will print some lines, as below: The lines at “0” are the straightest ones, if not, users are suggested to make bid calibration to ensure that the lines at “0” are the straightest ones.
  • Page 57 LC Easyjet-16W/18S User Manual V13GZ.1 After finish printing, please measure the frame length and input , and then click “Calc” to calculate actual length and Save. Notice: After input the figure in “Distance”, please click “Advanced Align” to check all the...

  • Page 58: Daily Maintenance

    LC Easyjet-16W/18S User Manual V13GZ.1 After click “OK”, the Step Calibration is completed. 6 Daily Maintenance Daily maintenance is very important for printer, in order to obtain good performance of printer, please follow the tips listed below: 1. Check the nozzle status every day before starting the printing job. Clean the nozzles once nozzle clog is found.

  • Page 59: Trouble Shooting

    LC Easyjet-16W/18S User Manual V13GZ.1 print head.  If the printer is not operated less than 4 days, please fill the maintenance capper with cleaning solution and move the print head to stay on the maintenance capper to make sure the head keep being moist, refer to the 3.1.7.2.5.
  • Page 60 2. Loading the media again and set the correct position. during printing 3. Pinch roller 3. Check whether all the pinch roller grip the media.  Zhengzhou LECAI Science And Technology Co., Ltd.  Hotline： 400-717-6789  Te l： 86-371-67896626 ...

This manual is also suitable for:

Lc easyjet-18s

Table of Contents