Connection Diagram; Wire Definition; Installation - EleCycles OMT-M3 Manual

3)

Connection diagram:

To Head Light
To Controller

Wire definition:

Red： Power supply-VCC
Blue： Electronic lock-DS
Black： GND
Green： Data RXD
Yellow： Data TXD
BROWN： Head light(+) -DD
White： Head light(-)-GND
Remark： Connectors and Wire colors could be customized

5) Installation

●Install the display in the middle of handlebar, then adjust
to suitable angle, install the press button to left side ofhandlebar.
●Power off the device, connect the device to controller.
●Power on
2