Table of Contents
Advertisement
> Before Start
> Part Names
∫ Dig Filter
Select the item with
/
on the remote controller and press ENTER.
"SHARP" (Default Value): Sound with more structure and firmness
"SHORT": Sound that starts quick and seems to move forward
"SLOW": Soft and fluid sound
∫ Digital Out
Make settings for digital audio output.
Select the item with
/
on the remote controller and press ENTER.
"On" (Default Value), "Off"
∫ Tuner Setting
Search Level
You can choose to have only those FM stations with strong
reception selected when tuning into stations automatically if
tuning regularly stops on FM stations with weak reception.
Select the item with
ENTER.
"Normal" (Default Value)
"Strong" : Select only stations with strong reception.
DAB Scan
You can run the auto scan when new DAB stations are added or
when you move house.
DAB DRC
With the DRC (Dynamic Range Control) setting, you can reduce the
dynamic range of DAB digital radio so that you can still hear quiet
parts even when listening at low volume levels - ideal for listening to
the radio late at night when you don't want to disturb anyone.
Select the item with
ENTER.
"0" (Default Value) : DRC off
"1" : Large reduction in dynamic range
"1/2" : Small reduction in dynamic range
NameEdit
You can give names to the stations that you have registered. For
(FM stations only)
details on how to enter text, refer to "Entering text" (
System Info
The MAC address of this unit and the current firmware version will be displayed.
26
> Install
> Initial Setup
/
on the remote controller and press
/
on the remote controller and press
P22).
> Playback
Supplementary information |
Select "MAC address" or "Firmware" with
Factory Reset
Reset the settings of this unit to the status at the time of shipment. We recommend that you
take a note of the settings you have changed before going ahead with a factory reset.
To reset, select "Reset Start" with
/
ENTER again to start the rest. The unit will be placed on standby automatically when
initializing is completed.
Update
"Update" is not displayed if there are no firmware updates.
∫ via Network
Press ENTER to select when you want to update the firmware via network.
∫ via USB
Press ENTER to select when you want to update the firmware via USB.
Advanced Setup
/
on the remote controller.
on the remote controller and press ENTER. Press
| Others
E
N
Hide quick links:
Advertisement
Table of Contents
