Table 1: At Commands - Thermo Scientific V.22/212A User Manual

(Note: s=string; n=decimal, 0-255; x=Boolean, 0/1=false/true)
COMMAND DESCRIPTIONS/OPTIONS
&Qx Same as &M
&Rx CTS Control, 0/1, 0 = CTS always ON
&Sx DSR Mode, 0/1, 0 = Always ON
&Tn Test Mode (see Table 7)
&V View Active Profile and User Profiles
&Wx Write Current Config to NVMEM x=0/1
&Xn Sync Tx Clk Mode, 0/1/2=int/ext/slave
&Yx Designate Default User Profile 0/1
&Zn=s Store a Telephone Number, n=0-3
Xn VERBOSE/NUMERIC RESULT CODE
X0 OK/0, CONNECT/1, RING/2, NO CARRIER/3, ERROR/4
X1 X0 Functions + CONNECT 1200/5, CONNECT 2400/10
X2 X1 Functions + NO DIAL TONE/6
X3 X1 Functions + BUSY/7
X4 X3 Functions + NO DIAL TONES/6
Mn SPEAKER MODE
M0 Speaker Off
M1 Speaker ON during connect only
M2 Speaker ON always
M3 Speaker ON during call progress
TABLE 1: AT Commands, cont.
TABLE 2: Result Codes
TABLE 3: Speaker Modes
24
FACTORY
DEFAULT
N/A
0
0
N/A
N/A
0
0
N/A
N/A