Operating Procedure - Freecom SAF-Z80K2 Owner's Manual

OPERATING PROCEDURE

Ensure the unit is placed on even ground.
WARNING:
Once you turn off the unit, the oscillation louver will swing back to the level. The fan will
keep running about 2 minutes to release heat.
DO NOT unplug from the mains till the fan is off.
2. Press the MODE control to select the desired performance.
3. Press AUTO SWING to control the air delivered direction.
4. Set the TIMER, if required.
HOW TO EMPTY THE WATER TANK
1. Gently pull out the water tank and
lift it by the handle.
2. Open the sliding which on the left
side of the tank cover.
3. Pour water out. Clean the tank with
water if necessary. Do not use any
chemical solvent to clean it.
4. Slide back the opening and press
back the handle in its original place.
5. Replace the water tank into the unit.
7