Control Panel - Freecom SAF-Z80K2 Owner's Manual

CONTROL PANEL

6
1. POWER ON/OFF SWITCH BUTTON
This dehumidifier is with AUTO RESTART function after power cut.
Once the power is restored after a power failure, the appliance will restart automatically.
2. MODE – Fan Speed Setting
This dehumidifier offers you 3 Modes for your selection. The indicator light will illuminate
when the unit is operating in any of these modes. If the ambient humidity reaches the
desired setting, the indicator will flash, the heater will stop.
When you turn on the unit by main power, it starts on "NORMAL" MODE.
Press "MODE" to select desired Speed.
Its path cycle should be: NORMAL → SILENT → POWERFUL
NORMAL – Automatic control the fan speed for the most comfortable ambient humidity.
SILENT – Quiet operation with low fan speed, especially at night.
POWERFUL – Operating with full speed for maximum performance and dry laundry
Restart the unit will be on previous setting.
3. SET HUMID. – Desired ambient humidity setting
Press the button to select desired ambient humidity settings, i.e. around 65%, 55% and
about 45%. The indicator light will illuminate when the unit is operating in any of these
settings.
When you turn on the unit by main power, it starts on "≈55%" setting. If the ambient
humidity reaches the desired setting, the "MODE" indicator will flash, and the heater will
stop.
Its path cycle should be: "≈55%" → "≈65%" → "≈45%"
FULL TANK
+5%
SET HUMID. AUTO SWING
4 5
function.
65% POWERFUL
55%
SILENT
45% NORMAL
SET HUMID. MODE
3 2
5
ON/OFF
1