2.1 Overview devices The manual refers to the following devices: (Order code printed in bold type): SCN-BWM55.01 Motion detector, 2 Pyro detectors, matt finish o 2 Pyro-detectors, Sensitivity separately adjustable for day/night/presence 2 separate configurable Light channels, HCV and Alarm channel;...
In addition to the standard elements, programming button and KNX connection, the position of the sensors and the LEDs is shown on the picture above: S1/S2 sensor 1/sensor 2 red LED (Programming-LED) green LEDs white LED MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Up to 8 scenes can be activated which can cause adjustable actions in the light channels 1/2. Brightness The correction of the measured brightness value and the sending conditions for the light value can be set here. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Product type: Wall mounted Medium Type: Twisted Pair (TP) Product name: SCN-BWM55.01 ; Motion detector 180° Order number: dependent of the used type, e.g. SCN-BWM55.01 2.7 Commissioning After wiring, the allocation of the physical address and the parameterization of every channel follows: (1) Connect the interface with the bus, e.g.
The object is permanently long reacts to incoming button displayed and is used to telegram override the automatic control of the light channel. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 10
"Brightness" is set telegram brightness to "Basic setting or active dependency object ´Dark´" next light channel MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 11
DPT 1.003 receive HCV channel External push- Object is displayed after reacts to lock button for blocking activation command the motion detector MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 12
"Lock object or enable object"; Object is used to lock/enable the alarm function. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 13
Object can be activated in the sends Status Failure detection general settings and sends etc. cyclically a "1" telegram if device is on the bus. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 14
Motion detector Switch actuator, Motion direction detection can left to right sends switching etc. be activated in the menu Alar command MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 15
DPT 5.001/ DPT according to the setting DPT 2.001 "Output object" next logic Table 1: Overview and Usage of the communication objects MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Switching 1 Bit LED white Switching 1 Bit Scene Input 1 Bit Output heartbeat Status 1 Bit Brightness sensor Status 1 Bit MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 17
C stands for communication, R for reading, W for writing, T for transmission, and U for updating. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Technisches Handbuch Bewegungsmelder SCN-BWM55.x1 4 Reference ETS-Parameter 4.1 General Settings The following figure shows the submenu for general settings: Figure 3: General Settings MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 19
Cy li al se di g heart eat Activation of a cyclic not active 1min – 24h "heartbeat" telegram Table 3: Parameter - General Settings MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
"General settings" are setting) used. individual Individual: Individual values can be set for the sensitivity of this light channel. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
In half automatic mode, the output is switched on via the "External push-button short" object and is automatically switched off again after the follow-up time has expired.. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Lock (current state) The light channel is locked in its current state and remains locked until the locking process is deactivated.. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Light channel 1 – Output 2 1 Bit Second switching function of the light channel Table 9: Communication objects - Output object "switching" MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 25
Light channel 1 – Output 2 1 Bit Second switching function of the light channel Table 10: Communication objects - Output object "Dimming absolute" MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 26
Output object 1 (depending on the parameterisation Switching, absolute dimming or scene) can send the parameterised value cyclically. In addition, the second switching object can also send its value cyclically. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
"External push button short", then the light channel is blocked for 10 seconds for motion detection in order to leave the room and prevent brief restart. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 29
The output is then switched to the orientation light state and can thus dim the light to a darker level in order to be able to leave the room safely. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 30
The object "External push button short" can additionally override the light channel. The motion detector can be switched to manual mode by pressing twice. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Page 31
The output is then switched to the orientation light state and can thus dim the light to a darker level in order to be able to leave the room safely. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
All output objects of the slaves (Object 40) have to be connected to the object External motion (Object 45) of the master. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Object sends a 1 if the left sensor has detected a left to right motion first and then the right sensor Table 17: Communication objects - Motion direction MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
The parameter "Request inputs after bus voltage reset" defines whether the external inputs of the logic are to be queried after a restart.. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
The lighting characteristics of the LEDs can be adjusted according to the parameters listed above. A typical application for the use of the white LED would be e. g. the use as night light. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
For example, the value of the disable function can be changed or the value of the external input button can be changed. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
Name Length Usage Brightness sensor – Status 2 Byte Sending the state of the brightness value Table 25: Communication object - Brightness MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
All activities on the device should only be done by an electrical specialist. The county specific regulations and the applicable EIB-directives have to be observed. MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de...
• Block and forced setting functions with release time • Input object for external button with release time • Integrated bus coupling unit • 3 years warranty DIN EN ISO 9001 MDT technologies GmbH 51766 Engelskirchen • • Papiermühle 1 TAW Cert Tel.: + 49 - 2263 - 880...
Page 46
A500 alpinweiss Jung A500 alpinweiss Jung Aplus Alu Jung A500 Alu DIN EN ISO 9001 MDT technologies GmbH 51766 Engelskirchen • • Papiermühle 1 TAW Cert Tel.: + 49 - 2263 - 880 Fax: + 49 - 2263 - 4588 •...