For Windows Server 2008 R2 - Fujitsu FP-1000 Installation Manual

4.2

For Windows Server 2008 R2

• If the [User Account Control] dialog box is displayed, click [Yes].
Uninstall procedure:
(1) Click [Start]  [Devices and Printers].
(2) Select "FIT FP-1000 Raster" in [Printers and Faxes] section and then click [Remove device].
(3) When the "Are you sure you want to remove this device? FIT FP-1000 Raster" screen appears,
click [Yes].
(4) Select an installed printer (such as "Fax" or "Microsoft XPS Document Writer") in the [Printers
and Faxes] section and then click [Print server properties].
(5) Click the [Drivers] tab.
(6) Select "FIT FP-1000 Raster" from the [Installed printer drivers] list and then click [Remove].
(7) When the [Remove Driver And Package] screen is displayed, select [Remove driver and driver
package.] and then click [OK].
(8) When the "Deleting this printer driver package will remove it from the system. Are you sure you
want to delete FIT FP-1000 Raster?" screen appears, click [Yes].
(9) When the [Remove Driver And Package] screen appears, click [Delete].
(10) Click [OK] after driver removal completes and then click [Close] to exit the [Print Server
Properties] dialog box.
(11) Turn off the printer and restart your computer.
Copyright 2011 – FUJITSU ISOTEC LIMITED
FP-1000 Installation Guide-2 1.1.0.0
31 of 57