Fujitsu FP-1000 Installation Manual page 26

(10) When the installation is finished, the following setup screen is displayed for you to specify the
interface.
(11) The following setup dialog is displayed.
For a serial port connection:
Select "FP1000SERPRT" or "FP1000SER2PRT" in [Device Name].
Select the connected port name (e.g. COM1) in [Port Name].
For a USB port connection:
Select "FP1000USBPRT" or "FP1000USB2PRT" in [Device Name].
Select the printer's serial number in [Serial Number].
To obtain the serial number, follow the instructions in "3.2.4 Check serial number."
For LAN port connection:
Click [Printer Detection], and then select the printer that appears.
Then, click [Printer Setting].
Set the port and then click [OK]. This updates the printer settings and completes the installation.
(For more information about the setup, refer to the application programmer's guide.)
* Confirm the installation according to "3.2.3. Procedures to confirm installation."
Copyright 2011 – FUJITSU ISOTEC LIMITED
FP-1000 Installation Guide-2 1.1.0.0
25 of 57