Serta CR48150 Assembly Instructions Manual
Serta CR48150 Assembly Instructions Manual

Serta CR48150 Assembly Instructions Manual

Ez tool free assembly sofa

Advertisement

Quick Links

Limited Warranty

True Innovations seating products are warranted against defects in material and workmanship
while owned by the "Original Purchaser". The term "Original Purchaser" is defined as that party or
entity which purchases True Innovations furniture from an authorized True Innovations retailer as
shown by the original sales receipt. This warranty does not apply to "as is" or previously owned
seating products.
True Innovations warrants its products to be free from defects in materials and workmanship
(normal wear and tear, fading and stretching excepted), for one year from the date of purchase,
except as provided below under the limited warranty.
The exceptions or exclusions to this warranty are as follows:
1. Any warranty claim that is submitted after the limited warranty period, or without proper proof of
purchase will not include the cost of parts, labor, or delivery.
2. This warranty shall not apply to the True Innovations products which have been subjected to
misuse, neglect, alteration, modification, or attachments, either caused by the original purchaser,
shipping, storage, accident, fire, flood, or acts of God.
In the event of a defect in material or workmanship covered by this warranty, True Innovations will
repair or replace, at their discretion, without charge the warranted furniture within a reasonable
amount of time. We reserve the right to require damaged parts to be returned to us upon request.
Natural markings such as scars, brands, grain variations, wrinkles, color variations, etc. will be
considered normal characteristics and not construed as defects. We cannot warrant leather
against scratching or scuffing, as all leather is subject to blemishes with use.
For claims or questions concerning this warranty, please contact True Innovations Customer
Service department on the web at www.truecustomersupport.com. Be prepared to provide your
name, address, daytime phone number, the model and purchase order number of the product, date
of purchase, and the store where it was purchased. True Innovations requires that the original
sales receipt be submitted with all requests to confirm that you are the original purchaser according
to our written warranty.
This warranty gives you specific rights, and you may also have other rights, which vary from state to
state.
All warranties are limited to the original purchaser for normal use by a maximum of two users. Total
weight capacity is 500 pounds or less for two users, or 250 pounds or less for a single user.
Should you prefer to speak with a service representative, you may call toll free: 1-855-372-2315.
EZ Tool Free Assembly Sofa
Model: CR48150 / CR48151 / CR48152 / CR48153
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Customer Service: 1-855-372-2315

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR48150 and is the answer not in the manual?

Questions and answers

Summary of Contents for Serta CR48150

  • Page 1 Assembly Instructions The exceptions or exclusions to this warranty are as follows: Model: CR48150 / CR48151 / CR48152 / CR48153 1. Any warranty claim that is submitted after the limited warranty period, or without proper proof of purchase will not include the cost of parts, labor, or delivery.
  • Page 2 Assembly Instructions Step 6 -- Insert the Back Cushions (J) into the appropriate Back Covers (K). Fluff all cushions to allow them to expand. Lastly, position all cushions on the sofa. Thank you for selecting one of True Note:There is a velcro between the back cushions and the back frame. Please stick them according to the location.
  • Page 3 Step 5 -- Secure the bottom and back flaps with hook and loop tape. Remove the plasic caps on the threaded bolts of each leg. Attach the Wood Legs with Washers (B & D) to the corners of the sofa. NOTES: •...
  • Page 4 Assembly Instructions Step 4 -- Move the two assembled parts together. Align the holes of Seat Frames (G1 & G2) and Back Frames (H1 & H2) to the other side and secure with one Thumb Bolts (A) to the back frames. Then attach the seat frames by using two Wood Legs (C), Thumb Bolts (A), Flat Washers (E) and T-Nuts (F).
  • Page 5 Parts List Step 3 -- Turn over the Arm and Seat Frame with “L” Label (G1) and slide the Back Frame with “L” Label (H1) into the seat frame until fully engaged. Align the holes of the Back Frame (H1) to the Arm Frame (G1) and secure with one Thumb Bolt (A).
  • Page 6 Assembly Instructions Step 1 -- Step 2 -- Remove all parts from the carton and place them on a protected surface or Turn over the Arm and Seat Frame with “R” Label (G2) and slide the carpet. Place the Arm and Seat Frames (G1 & G2) upside down and open Back Frame with “R”...

This manual is also suitable for:

Cr48152Cr48151Cr48153

Table of Contents