Auto Operation; Healthy Dehumidification Operation - LG SP182CN N50 Owner's Manual

Auto Operation

<For Cooling Model>
The temperature and fan speed are automatically set by the electronic
controls based on the
actual room temperature.
If you feel hot or cold, press TEMPERATURE SETTING buttons for more
cooling or heating effect.
You cannot switch the indoor fan speed. It has already been set by the
Auto Operation Mode rule.
<For Heating Model>
You can set desired temperature and indoor fan speed.
Setting Temp. Range : 18~30°C.
NOTE

Healthy Dehumidification Operation

During Healthy Dehumidification Operation
If you select the dehumidification mode on the OPERATION MODE
SELECTION BUTTON, the product starts to run the dehumidification
function.
It automatically sets the room temperature and airflow volume to the best
condition for dehumidification, based on the sensed current room
temperature.
In this case, however, the setting temperature is not displayed on the remote
controller and you are not able to control the room temperature either.
During the healthy dehumidification function, the fan speed is automatically
set according to the optimization algorithm responding to the current room
temperature status, so that the room condition is kept healthy and
comfortable even in the very humid season.
: You can not set the actual setting temperature and the fan
speed in this operation mode. But you can use the Auto swing
in this operation. If the system is not operating as desired,
switch manually to another mode
Operating Instructions
Code Description
2 Cool
1 Cool slightly
0 Maintain
room
temperature
-1 Heat slightly
-2 Heat
Owner's Manual 13