Download Print this page
Fluval SEA CP2 Instruction Manual

Fluval SEA CP2 Instruction Manual

Sea cp series
Hide thumbs Also See for SEA CP2:

Advertisement

Quick Links

CP1
INSTRUCTION MANUAL
MODE D'EMPLOI
CP2
MANUAL DE INSTRUCCIONES
CP3
BEDIENUNGSANLEITUNG
INSTRUCTIEHANDLEIDING
CP4
MANUAL DE INSTRUÇÕES
MESURES DE SÉCURITÉ IMPORTANTES
AVERTISSEMENT – Pour éviter toute blessure, il faut observer des mesures de sécurité de base,

IMPORTANT SAFETY INSTRUCTIONS

WARNING – To guard against injury, basic safety precautions should be observed, including the
following.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
and all important notices on the appliance before using. Failure to do so may result in damage to
the unit.
2. DANGER – To avoid possible electric shock, special care should be taken since water is employed in
the use of aquarium equipment. For each of the following situations, do not attempt repairs yourself;
return the appliance to an authorized service facility for service or discard the appliance.
A. If the appliance shows any sign of abnormal water leakage or if RCD (or GFCI- Ground Fault Current
Interrupter) switches off disconnect the power supply cord from mains and remove the circulation
pump from water.
B. Carefully examine the appliance after installation. It should not be plugged if there is water on parts
not intended to be wet.
C. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or it is
dropped or damaged in any manner. The power cord of this appliance cannot be replaced; if the cord
is damaged, the appliance should be discarded. Never cut the cord.
D. To avoid the possibility of the appliance plug or receptacle getting wet, position the appliance to
one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug.
A "drip loop" (see illustration 1) should be arranged by the user for the
cord connecting appliance to a receptacle. The "drip loop" is that part of
the cord below the level of the receptacle or the connector if an extension
cord is used, to prevent water travelling along the cord and coming in
contact with the receptacle. If the plug or receptacle does get wet, DON'T
unplug the cord. Disconnect the fuse or circuit breaker that supplies
power to the appliance. Then unplug and examine for presence of water in
receptacle.
3. WARNING – Close supervision is necessary when any appliance is used
by or near children. This appliance is not intended for use by persons
(including children) with reduced physical, sensory ormental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
4. To avoid injury, do not touch moving parts or hot parts.
5. CAUTION – Always unplug or disconnect all appliances in the aquarium from electricity supply
before placing hands in water, before putting on or taking off parts and whilst the equipment is being
installed,maintained or handled.When inserting or removing the circulation pump from the water,
always pull out the main electricity plug. Never yank cord to pull plug from outlet. Grasp the plug and
pull to disconnect. Always unplug an appliance from an outlet when not in use.
de leur sécurité ou qu'elles en aient reçu les directives nécessaires à l'utilisation de cet appareil.
Toujours surveiller étroitement les enfants afin de s'assurer qu'ils ne s'amusent pas avec cet
6.
7.
8.
9.
10.
11.
INT
Flu
exc
cap
to 1
DE
A.
B.
C.
D.
ATT
Flu
mo
SA
Att
Bef
app
sho

Advertisement

loading
Need help?

Need help?

Do you have a question about the SEA CP2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fluval SEA CP2

  • Page 1: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS INSTRUCTION MANUAL MODE D’EMPLOI WARNING – To guard against injury, basic safety precautions should be observed, including the MANUAL DE INSTRUCCIONES following. BEDIENUNGSANLEITUNG READ AND FOLLOW ALL SAFETY INSTRUCTIONS INSTRUCTIEHANDLEIDING MANUAL DE INSTRUÇÕES and all important notices on the appliance before using. Failure to do so may result in damage to the unit.
  • Page 2 INTRODUCTION • Direct the water flow as desired (Fig. 4). Fluval Sea CP series circulation pumps are designed to work in small reef aquariums. The • Connect to electrical supply. exclusive design guarantees a continuous and powerful water flow with 270° directional flow MAINTENANCE capability.
  • Page 3 CP1 & CP2 CP3 & CP4 cup. Fluval Sea CP series circulation pumps are guaranteed against defects in material or must workmanship under normal aquarium usage and service for 2 years. We offer a 2 year guarantee on all non replaceable parts which means that the pump will be repaired or replaced at the manufacturer’s discretion, free of charge, when the complete pump is returned...

This manual is also suitable for:

Sea cp3Sea cp1Sea cp4