Remote Control; Diagnostic Display - Handicare Minivator Simplicity 950 Series User Manual

Operating your Minivator stairlift
Figure 5

Remote control

The remote control Figure 5) is used to call
the lift to either the top/bottom of the stairs or
to operate a powered folding hinge where fitted.
The control may also be used by an attendant
where the user is unable to operate the stairlift
themselves.
The attendant should always remain off
the staircase until the stairlift is stationary.
6 USER MANUAL
Figure 6

Diagnostic display

The stairlift is fitted with a diagnostic display
Figure 6) that displays a code to help diagnose
faults. The display is either mounted on the lower
front panel of the lift or on the downside panel
of the main body of the lift depending on your
particular model. Refer to Appendix 1 for an
explanation of the diagnostic codes. If you
should experience a problem with your lift please
examine the display and make a note of any
codes that are displayed. Please inform the
customer services operator of these codes
when reporting any fault.