Download Print this page
ThermoWorks TW362B Operating Instructions

ThermoWorks TW362B Operating Instructions

Electronic cooking thermometer/timer

Advertisement

Quick Links

Operating Instructions

TW362B ELECTRONIC COOKING THERMOMETER/TIMER
Over cooking food detracts from its taste and nutritional value.
Under-cooking certain foods, like pork, poultry and other meats, can
be hazardous to your health. Due to the different types, weights and
shapes of foods, determining doneness by time or color alone can
be difficult. The only way to know if your food has been cooked to a
safe internal temperature is to use a food thermometer.
The TW362B Electronic Cooking Thermometer/Timer helps ensure
that your food will be cooked to your desired internal temperature
by letting you pre-set the cooking time and temperature. For best
results, please follow the instructions on the reverse side.
TABLE OF SUGGESTED COOKING TEMPERATURES
These are just suggestions. Check the USDA and other websites for more
details on preparing food safely: (www.isitdoneyet.gov). Please consult
cookbooks, recipes and personal experience to determine the best cooking
temperature.
Cut of Meat
Doneness
Beef, steaks/roasts
Rare
Medium rare
Medium
Beef, ground
Poultry, whole/part
Turkey, whole/ground
Pork, chops/ribs/roasts
Fish
Veal & Lamb
USING THE THERMOMETER/TIMER
1. Pre-heat the oven to the desired temperature.
2. Clean the metal probe but do not immerse the cable.
3. Insert the tip of the probe into the thickest part of the food. It
should not touch any bone, fat, or gristle.
4. Turn the instrument on using the ON/OFF switch.
5. Place the food in the oven with the probe in place. Leave the
thermometer outside the oven. The probe wire will be held in
place by the oven door.
6. Insert the plug at the end of the probe wire into the thermometer.
The internal food temperature will show in the THERMO TEMP
section of the LCD display.
7. Refer to the Table of Suggested Cooking Temperatures and set
the desired cooking temperature for the food and doneness you
would like. Set the Temperature Alert as follows:
a. Slide the ALERT switch to OFF.
b. Press the UP or DOWN button to set the desired temperature
alert. Hold the buttons for faster adjustment.
c. The set temperature will show in the SET TEMP section of the
LCD display.
d. Slide the ALERT switch to ON.
8. The alarm will automatically sound for five minutes when the tip
of the probe reaches the set temperature.
9. Press the START/STOP button to stop the alarm temporarily. The
alarm will sound again for five seconds every minute until it is
turned off. To turn it off, slide the ALERT switch to OFF.
10. Remove the food from the oven, then remove the probe.
CAUTION: The probe and wire are hot. Do not touch with
your bare hands.
11. Clean the metal probe with an anti-bacterial probe wipe or
equivalent. Do not immerse the cable.
OVEN
Temp °F Temp °C
130
55
145
63
160
71
Well
170
77
Well
160
71
Well
165
74
Well
165
74
Well
160
71
Well
145
63
Well
160
71
USING THE TIMER ONLY
1. Press the HR and MIN buttons to set the desired hour and minutes
2. Press START/STOP to start the countdown timer.
3. When the timer reaches zero, the alarm will sound for one minute.
4. Press the HR and MIN buttons simultaneously to clear the timer
1. Do not touch the hot probe or wire with bare hands during or
2. Keep the metal probe and wire away from children.
3. Clean the metal probe with an anti-bacterial probe wipe or
4. Do not expose the thermometer to water, moisture, direct heat,
5. Do not use in microwave oven.
6. Keep the plug at the end of the probe wire clean and dry. Water
7. Do not use the probe at temperatures over 392°F / 200°C. Do
8. Where elevated temperatures are required, shield the cable with
Internal food
temperature
ALERT
Braided stainless
steel probe cable
closes in oven door
CAUTION: The probe and wire can get very hot.
Do not handle with your bare hands after removing
from oven.
to be timed. Hold the buttons for faster adjustment.
Press START/STOP to stop the alarm.
display.
CAUTION
after cooking.
equivalent. Do not immerse the cable.
surface heat, or direct sunlight.
or moisture on the plug can result in a poor connection and
inaccurate temperature readings.
not let the probe or cable touch heating elements, flames, or grill
surfaces.
loosely wrapped aluminum foil. Replacement probes (model
362XX) are available from www.thermoworks.com.
www.thermoworks.com
Preset
temperature
at which the
Countdown
alarm will
timer
sound
1:59
TIMER
00
THERMO TEMP
SET TEMP
72
165
°F
°F
POWER
ON
ON
OFF
OFF
CLEAR
UP
DOWN
START/STOP
801-756-7705

Advertisement

loading