Philips dynalite DDPB22RJ12 Instruction Manual

.........
DDPB22RJ12
Network Junction Box
features

22 x RJ12 networking sockets. All network connection
points are paralleled together.

1 x 5 way network screw terminal. Common with all RJ12
sockets.

Allows for Dynet network to be run in a star topology

Enclosure is DIN Rail Mount with Circuit Breaker Profile

Simple Installation - DIN Rail mount facilitates installation.
All connection terminals are accessible without disassembly
RJ12 Plug Connection diagram
To reduce the risk of fire or electric shock, do not expose
this device to rain or moisture. Do not energise unless the
front cover is in place. This device must be earthed.
Installation, programming and maintenance must be
carried out by qualified personnel.
Warning – This is a class A product. In a domestic environment
this product may cause radio interference in which case the user
may be required to take adequate measures.
Read Instructions – We recommend that you read this
Instruction Manual prior to commencement of installation.
Power Sources – This device should only be operated from the
type of supply specified on the front cover. This device must be
earthed.
Mounting Location – Install in a dry, well-ventilated location.
Controllers may emit some mechanical noise.
account when deciding the mounting location.
Data Cable – For 5 way screw terminal use screened, stranded
RS485 data cable with three twisted pairs. For RJ12 sockets use
Flat 6 way cable. Segregate from mains cables by 300mm
minimum. Connect on to other network devices in a 'daisy chain'.
A data cable that is connected to an energised device is live. Do
not cut or terminate live data cables.
Electrical diagram
Take this into