Before Your First Use - Itek I60018CD Safety & Instruction Manual

Remote Control
1. Standby
2. Mode
3. Mute
4. Skip backward
5. Play/Pause
6. Skip forward
7. Repeat
8. Stop
9. Prog
10. LED ON/OFF
11. Volume - 12.
Volume +
BEFORE YOUR FIRST
USE:
1. Remove the
product from the
box.
2. Remove any
packaging from the
product.
3. Please retain all packaging until you
have checked and counted all the
parts and the contents against the
parts list.
4. Your appliance is now ready for
normal use.
Dispose of the packaging in a
responsible manner.
USING THE REMOTE CONTROL TO
OPERATE THE UNIT:
Aim the remote control directly at the
remote control sensor (IR) on the front
panel. Don't put any objects between the
remote control and the system while
operating the unit.
BATTERIES:
1. Slide out the battery holder from
the remote control case. (Push tab
"A" towards the middle first, see
diagram).
2. Place one 3V CR2025
(Lithium) battery into the battery
holder, observing the polar
marking. If the battery is placed
incorrectly, the remote control will
not work. Dispose of the old battery
properly. Do not leave it lying
around where a you child or pet
could play with or swallow it.
3. The battery may explode or leak if it
is mistreated. Do not attempt to
recharge it or disassemble it. Do not
dispose of the old battery in a fire.
4. Insert the battery holder into the
battery compartment.
NOTE: Please remove all the batteries to
prevent damage or injury from battery
leakage if the unit will not be used for a