Protecting Your Product Against Theft - Pioneer AVH-W4400NEX Operation Manuals

RETURN Press to return to the specified point and start playback from there.
Press to pause or resume playback.
or For audio: Press and hold to perform fast reverse or fast forward.
For video: Press to perform fast reverse or fast forward.
or Press to return to the previous track (chapter) or go to the next track (chapter).
Press to answer or end a call.
Press to stop playback.
If you resume playback, playback will start from the point where you stopped.
Press the button again to stop playback completely.
FOLDER/P.CH Press to select the next or previous title or folder.
Press to recall radio station frequencies assigned to preset channel keys.
Press to answer or end a call.

Protecting your product against theft

CAUTION
• Do not attempt to detach the front panel while DISC/SD is in the eject position.
• Do not attempt to detach the front panel while data is being written to USB/SD. Doing so may cause
the data to become corrupted.
• After the front panel has been detached, the attaching plate will move back to its original position
automatically. Be careful not to let hands or other objects get caught behind the monitor as it is
moving back.
• Please make sure that the front panel is in its original position while the vehicle is in motion. It is
dangerous to drive with the front panel sticking out.
• Do not place beverages or other objects on top of the front panel while it is fully open.
Important
• Handle the front panel with care when removing or attaching it.
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• If removed, replace the front panel on the product before starting up your vehicle.
Removing the front panel
1
Press .
2
Touch .
3
Slide the dial at the bottom of the front panel to the right, and lift up the front
panel while pushing down on the dial.
8
En
4
Put the front panel into the provided protective case for safe keeping.
Attaching the front panel
1
Slide the front panel into the top of the product and push it into place.
Slide the inserter on the front panel into the insertion slot on top of the unit and push
it into place.
2
Push on the bottom of the front panel until it clicks into place.