Table of Contents
Advertisement
• When the camera view of both the rear view camera and 2nd camera are available, the key to switch
the display appears. Touch this key to switch the display between the rear view image and 2nd
camera image.
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the shift lever is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Reverse Gear Setting].
• If you touch
while the camera image is displayed, the displayed image turns off temporarily.
• When the camera view of both the rear view camera and 2nd camera are available, the key to switch
the display appears. Touch this key to switch the display between the rear view image and 2nd
camera image.
Menu Item
Description
[Camera View]
Set to [On] to display camera view at all times. (The same
[On] [Off]
mode is turned on when
view screen. The setting value is synchronized.)
NOTES
• To set the rear view camera as the camera for Camera View
mode, set [Back Camera Input] to [On] (page 50).
• When using the second camera, set [AV Input] to [Camera] or
[2nd Camera Input] to [On] (both settings are synchronized)
(page 50).
TIP
You can also turn this function on by touching [Camera View] on
the AV source selection screen or in the source list.
[Back Camera Input]
Setting the second camera activation (front camera, etc.).
[Off] [On]
Setting rear view camera activation.
[2nd Camera Input]
Setting the second camera activation (front camera, etc.).
[Off] [On]
This function is synchronized with [AV Input] setting.
[Reverse Gear Setting]
Setting the polarity of the rear view camera.
[Battery]
The polarity of the connected lead is positive.
[Ground]
The polarity of the connected lead is negative.
NOTE
If the camera polarity setting is wrong, or wrong camera setting is
made, press RESET button to release the rear view camera screen
and then change the camera polarity setting to [Battery].
50
En
is touched on the camera
Menu Item
Description
[Back Camera: Reverse
Set whether to reverse the rear view camera images to be
Video]*
displayed on the front screen.
[Off] [On]
NOTE
This function is available when [Back Camera Input] is set to [On]
(Page XX).
[2nd Camera: Reverse
Setting the reversed image.
video]*
NOTE
[Off] [On]
This function is available when [AV Input] is set to [Camera] or [2nd
Camera Input] is set to [On] (page 50).
* This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
[Wi-Fi Settings]
Menu Item
Description
[Wi-Fi Settings]
(page 18)
[Demo Mode]
Menu Item
Description
[Demo Mode]
Setting the demo mode.
[On] [Off]
[System Language]
Menu Item
Description
[System Language]
Select the system language.
NOTES
• If the embedded language and the selected language setting are
not the same, the text information may not display properly.
• Some characters may not be displayed properly.
[Restore Settings]
Touch [Restore] to restore the settings to the default settings.
CAUTION
Do not turn off the engine while restoring the settings.
Advertisement
Table of Contents
