7.1 Manual control
7.2 Operating mode 'DMX'
In manual operation, the device functions are controlled by the function buttons of the control
panel and the display.
Press [FUNCTION] to open the main menu. The display shows 'Wait Time Set Mode: xx s' . Use
the two arrow buttons to set the waiting time for the timer function in a range of 1 ... 600 .
Press again [FUNCTION]. The display shows 'Start Time Set Mode: xx s' . Use the two arrow but-
tons to set the time period during which the device will continuously produce haze after the
waiting time of the timer function or after pressing the button [VOLUME] (1 ... 600 seconds).
Press again [FUNCTION]. The display shows 'Timer Smoke Volume Out: xx %' . Use the two arrow
buttons to set the haze output volume in a range 1 ... 100 %.
Press again [FUNCTION]. The display shows 'Fan Adjusting Volume: xxx %' . Use the two arrow
buttons to set the haze output intensity in a range 1 ... 100 %.
Press [FUNCTION] repeatedly until the display shows 'The DMX device address set: 1' . Use both
arrow buttons to select a DMX address in a range from 1 ... 510.
HF-900 Haze Fogger
Operating
29