Specifications - Dolmar AT-1831 C Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

No load speed
Overall length with nylon cutting head
Cutting diameter with nylon cutting head
Rated voltage
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
AT-1831 C / AT-1831 CD
• Even if the sound pressure level listed above is 80 dB(A) or less, the level under working may exceed 80 dB(A).
Wear ear protection.
Vibration
AT-1831 C / AT-1831 CD
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Model
Type of pipe
Split length
Net weight
Model
Model
AT-1831 C
Integrated pipe
-
3.9 kg
AP-183, AP-1840, BL1815N, BL1820, BL1820B, BL1830,
BL1830B, BL1840, BL1840B, BL1850, BL1850B, BL1860B
Sound pressure level
L (dB(A)) Uncertainty K (dB(A))
PA
79
Front grip
2
a (m/s ) Uncertainty
h
2
K (m/s )
≤ 2.5 1.5
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
Keep bystanders away.
Keep distance at least 15 m.
15m(50 )
FT
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
7 ENGLISH
AT-1831 CD
Splittable pipe
-1
3,500 - 6,000 min
1,843 mm
982 mm
300 mm
4.1 kg
D.C. 18 V
Applicable standard
or directive
0.7 2000/14/EC
Rear grip
2
a (m/s ) Uncertainty
h
2
K (m/s )
≤ 2.5 1.5
Applicable
standard or
directive
EN786