F) Essential Iii Recordmaster - Pro-Ject Audio Systems ESSENTIAL III Instructions For Use & Warranty

Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white. The earthing wire of the tonearm lead should be connected to the earth
terminal on your amplifier (if provided).
The digital output:
The record player has digital S/PDIF output through optical connector with switch between
24bit/48kHz and 24bit/96kHz. Use the optical input on your amplifier, AV receiver or D/A converter.
Optical cable is not supplied with the record player. Your dealer can help you with selection of the
optical cable.
ESSENTIAL III Recordmaster
Controls, features and connections
1 SPEED CONTROL
2 DRIVE PULLEY
3 PHONO/LINE OUTPUT, EARTH CONNECTION
4 PHONO/LINE OUTPUT SWITCH
___________________________________________________________________________________________________________
Switching on and off, changing replay speed
To play records at 33 r.p.m. press the speed control switch to starts the motor. Pressing the ON/OFF
switch two times selects 45 r.p.m.. The selected speed is shown respectively by the flashing LED. When
the platter has attained full speed, the LEDs stop flashing.
A long (more than three seconds) press on the ON/OFF switch stops the motor.
12
© Pro-Ject Audio Systems · Pro-Ject Essential I I I F l e x i - R a n g e · Revision 2018.05.15
SPECIFIC INFORMATIONS