Cleaning; Fitting A Plug; After Sales Service - Crock-Pot CSC038 Instruction Manual

ALWAYS unplug your slow cooker from the electrical outlet, and allow it to cool before cleaning.
CAUTION: Never immerse the heating base, power cord or plug in water or any other liquid.
•
The outside of the heating base may be cleaned with a soft cloth and warm, soapy water. Wipe dry. Do not use
abrasive cleaners.
•
Wash the glass lid and removable bowl with hot, soapy water. Do not use abrasive cleaning compounds or scouring
pads. A cloth, sponge, or rubber spatula will usually remove any food residue.
•
We recommend that you wash the removable cooking bowl by hand only, with a non-abrasive cleaning product and
cloth, to preserve the DuraCeramic
•
When required, clean the induction plate on the underside of the cooking bowl with a stain remover and multi-purpose
cleaner, recommended for stainless steel cookware. Dry immediately before storing.
•
No other servicing should be performed.
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed and
replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted.
The appliance must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord
and an appropriate plug fitted as detailed. If you remove the plug it must not be
connected to a 13 amp socket and the plug must be disposed of immediately.
If the terminals in the plug are not marked or if you are unsure about the installation of
the plug please contact a qualified electrician.
These appliances are built to the very highest of standards. There are no user serviceable parts. Follow these steps if the
appliance fails to operate:
1. Check that the instructions have been followed correctly.
2. Check that the fuse has not blown.
3. Check that the mains supply is functional.
If the appliance will still not operate, return it to the place it was purchased for a replacement. To return the appliance to the
Customer Service Department, follow the steps below:
1. Pack it carefully (preferably in the original carton). Ensure the appliance is clean.
2. Enclose your name and address and quote the model number on all correspondence.
3. Give the reason why you are returning it.
4. If within the guarantee period, state when and where it was purchased and include proof of purchase (e.g. till receipt).
5. Send it to our Customer Service Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham
OL2 5LN, UK
Telephone:
•
0800 525089 (free from UK landlines)
•
0161 621 6900 (standard rates apply)
Fax: 0161 626 0391
e-mail: enquiriesEurope@jardencs.com

CLEANING

coating.
™

FITTING A PLUG

AFTER SALES SERVICE

18
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Green/Yellow
(Earth)
Blue
(Neutral)
Brown
(Live)
Ensure that the outer sheath of
the cable is firmly held by the cord grip
3A
Fuse