Installation, Floor Stand; Placement Of Floor Stand In Packaging - Bang & Olufsen BeoVision 4-85 Installation Manual

Installation, Floor Stand

➀
- Place the Floor Stand in its packaging.
- Remove the Floor Stand packaging.
- Assemble the Floor Stand.
- Place the Floor Stand.
- Align the feets of the stand plate.

Placement of Floor Stand in packaging

! Be careful with covering the floor with protection materials to prevent damaging the surface. Although the package is sound, there
The elements in the Floor Stand installation consists of Floor Stand assembly (
To ensure a smooth installation it is recommended to follow a structured procedure. Please follow the suggested procedure below:
The purpose of this step is to place the Floor Stand in its packaging in an appropriate place. The aim is to obtain as less movement of the Floor
Stand as possible, which is a great advantage when moving large objects.
It is prudent to conduct a test run of the transport without the Floor Stand mounted on the crane. See the example below:
D
C
When the test run seems to proceed sensible, place the Floor Stand in its packaging where planned.
can be damage to the floor if not exercised great caution.
➀
A
B
A =
Wall
B = Floor Stand in packaging
C = Crane
Placement for Floor Stand
D =
Assembly area
=
Necessary workspace
=
Installation, Floor Stand
) and TV placement ( ➁ )
6