Page 3
This Class B digital apparatus complies with Canadian ICES-003. AVIS D’INDUSTRIE CANADA: Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
4.4 Operator’s Maintenance Procedures APPENDIX A. Components of End Item (COEI) and Basic Issue Items (BII) Lists B. Additional Authorization List (AAL) C. Expendable and Durable Items List PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
• Do not use contaminated eyecups or eyeguards. If contaminated, they must be replaced. • When installing the headmount over the protective mask, be careful not to break the protective mask’s seal around your face. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 6
• The IR illuminator is intended for increased illumination, as needed, when viewing at a close distance of up to 3m. • For the purpose of returning defective components, retain all packaging materials. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
For warranty information and customer support visit www.armasight.com/customer-support 1.2.2 PRODUCT REGISTRATION In order to validate the warranty on your product, the Customer must complete and submit FLIR Outdoor & Tactical Systems’ PRODUCT REGISTRATION FORM on our website (www.armasight.com/customer- support). 1.2.3 OBTAINING WARRANTY SERVICE For service, repair or replacement, please contact: FLIR OUTDOOR &...
It is adjustable and cushioned. The thin browpad should be used for larger heads, and comes attached to the head mount; the thick and medium browpads should be used for smaller heads, and are stored in the carrying case. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 9
3X MIL-SPEC LENS COMPASS 5X MIL-SPEC ADAPTER #118 LENS 5X AFOCAL LENS IR850-XLR EXTENDED RAIL ARFS3 ADAPTER ARFS5 HARD SHIPPING/ STORAGE CASE #101 FIGURE 2-2. OPTIONAL EQUIPMENT PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 10
It allows mounting in front of the left or right eye. I. WEAPON MOUNT (Part# ANAM000007) The weapon mount adapts the monocular to the receiver rail as configured for the modular weapon system kit. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 11
Dovetail Weaver Picatinny Rail Adapter Extends 7.5“ to 11.5” Tactical Scope Mount. V. HARD SHIPPING/ STORAGE CASE #101 (Part# ANHC000001) A protective case used for the shipping/ storage of the PVS-14 and its accessories. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 12
ITEM DATA Monocular Operating Temperature -51°C to +49°C (-60°F to 120°F) Monocular Storage Temperature -51°C to +85°C (-60°F to 185°F) Illumination Required Overcast starlight to moonlight PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
IR LENS HIGH LIGHT CUT-OFF WINDOW LATCH EYE RELIEF ADJUSTMENT POWER SWITCH OBJECTIVE FOCUS BATTERY POLARITY GAIN CONTROL INDICATOR (HIDDEN) FIGURE 3-1. MONOCULAR CONTROLS AND INDICATORS PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 14
NOTE: Indicators showing that the battery is low and that the IR is active are both visible in the eyepiece lens. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
-20°C (-4°F) 12 Hrs 10 Hrs AA Lithium L91 -20°C (-4°F) 60 Hrs 55 Hrs CAUTION: Verify that the device is OFF before installing the battery. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 16
2. Carefully press the demist shield onto the eyepiece. Be careful not to smudge the eyepiece lens or demist shield with your fingers or hands. 3. Replace the eyecup or eyeguard (see paragraph 3.2.3). PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 17
MEDIUM OR THIN) CHINSTRAP ADJUSTMENT AND SNAP SLIDING BAR BUCKLES HEADMOUNT SOCKET CHINSTRAP EYE RELIEF ADJUSTMENT ADJUSTMENT AND SNAP CHIN CUP HEADBAND FIGURE 3-3. PVS-14 HEADMOUNT ADJUSTMENTS PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 18
2. Press the release (Figure 3-6) to remove the mount from the helmet mount bracket. 3. Verify that the strap is laced onto the helmet mount bracket, as shown in Figure 3-5. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 19
The brow of the helmet should be parallel to the ground, and the helmet should be stable on the head. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 20
NOTE: Armasight recommends replacing the eyecup with an eyeguard if mounting the device on a weapon. 1. Adjust the monocular and weapon mount as shown in Figure 3-8. Be sure to align the alignment boss on the weapon mount with the alignment groove in the monocular.
Page 21
Ensure that the boss on the adapter fits into the groove on the monocular. FIXING SCREW THUMBSCREW PICATINNY/WEAVER ADAPTER #118 FIGURE 3-9. MOUNTING AN IR ILLUMINATOR PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 22
(see Figure 3-11). MAGNET FIGURE 3-10. LOCATING THE MAGNET FIGURE 3-11. COMPASS INSTALLATION PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Only operate the monocular in dark environments; if it is necessary to operate the device in daylight, use the objective lens cap to cover the objective lens. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 24
6. Readjust the vertical adjustment (Figure 3-3) of the head mount until the monocular is properly aligned with your eye. 7. Rotate the diopter adjustment for the clearest view of the image intensifier screen. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 25
Take precaution when using/ handling the helmet mount. Most damage occurs when the helmet mount has been left on the helmet when it is not being used. Observe the following precautions to protect the helmet mount. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 26
TILT ADJUSTMENT TILT ADJUSTMENT LOCK KNOB LEVER SIDE SIDE LEVER BUTTONS (2 EA) (FORE-AND-AFT (FORE-AND-AFT ADJUSTMENT) SOCKET SOCKET ADJUSTMENT) FIGURE 3-15. TILT AND FLIP-UP ASSEMBLY MECHANISMS PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 27
2. Attach the weapon mount to the monocular per paragraph 3.2.10, steps 1 and 2. 3. Mount the monocular, with the adapter, to the M16/ M4 receiver rail, per paragraph 3.2.10, steps 3 and 4. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 28
• The objective lens focus can be fine-tuned after installation, but in order to obtain an accurate reading, the compass must be vertical. (The compass image must be level.) PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 29
To allow focusing, the mated magnifier and objective lens will turn as a unit. 2. While observing an object, grab the magnifier and adjust the focus until the image becomes sharp and clear. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 30
(f) Place the monocular into the shallow pocket of the carrying case. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
2. Hardness – Do not use the DS-2 to decontaminate the PVS-14. To decontaminate the device, use 5% sodium hypochlorite and rinse with hot (70°C/158°F) soapy water. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
If you perform check and service procedures that indicate defects listed in this column, do not operate the equipment. Follow standard operating procedures for maintaining the equipment or reporting equipment failure. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 33
Turn monocular ON and observe that the system cuts OFF within 70±30 seconds. Turn the device OFF and then ON to reenergize it. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 34
Image Operator may use the TS-4348/UV to check resolution. Flickering, flashing, edge Refer to paragraph 4.3 to inspect for glow, or shading is observed. operational defects. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 35
Adapter 18 Before/ Weapon Inspect for dust, dirt or corrosion. Damaged, will not mount to After Mount monocular or will not mount to rail. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
If you experience an equipment malfunction that is not listed, or suggested corrective actions do not correct the fault, please contact Customer Support. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 37
Visual Make sure the monocular is clear. focused for infinity. If it is focused but the compass display is still not clear, please contact Customer Support. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
(see Figure 4-2). To check for edge glow, block out all light from the device by cupping a hand over the lens. If the image tube is displaying edge glow, the bright area will still show up; if edge glow occurs, please contact Customer Support. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Bright spots are acceptable if they do not interfere with the user’s ability to view the scene or perform missions. EMISSION POINT BRIGHT SPOT FIGURE 4-3. EMISSION POINTS AND BRIGHT SPOTS PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 40
No action is required if this condition is present, unless it interferes with the user’s ability to view the image or their ability to perform missions. FIGURE 4-5. CHICKEN WIRE PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
3. If necessary, repeat steps 1 and 2 for the other side of the headband and neck band. LOWER STRAP NECK PAD STRAP RETENSION TAB UPPER STRAP RETENTION TAB FIGURE 4-6. REINSTALLING THE NECK PAD PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
2. Thread the end of the right cord through the hole in the objective lens cap. 3. Tie a knot at each end of the cord. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
TOE/ MTOE. Illustrations are provided to help you identify the items. PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 44
Column (5), U/M (Unit of Measure). Indicates how the item is issued for the National Stock Number shown in column (2). Column (6), Qty Rqr. Indicates the quantity required. FIGURE A-1.COMPONENTS OF END ITEM PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 45
5340-01-397-6608 CAP, PROTECTIVE, DUST(80063) A3144318 EA 1 4020-01-446-8097 CORD, FIBROUS(80063) A3144306 EA 1 OPERATOR’S MANUALTM 11-5855-306-10 EA 1 CASE, SHIPPING & STORAGE(80063) A3264350 AGHC000001 EA 1 PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
BATTERY, NON RECHARGEABLE (AA), 1.5 Vdc (80058) 6135-00-985-7845 BA-3058/U 6135-01-333-6101 BATTERY, NON RECHARGEABLE (AA) (83740) L91, 1.5 Vdc 6625-01-323-9584 TEST SET, ELEC. SYS. TS-4348/UV (80063) A3139775 5855-01-423-0817 MAGNIFIER LENS ASSEMBLY (80063) A3256391 PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
TABLE C-1. EXPENDABLE AND DURABLE ITEMS LIST (1) ITEM (3) NATIONAL STOCK (2) LEVEL (4) ITEM NAME, DESCRIPTION, CAGE, PART NUMBER NUMBER NUMBER 6640-01-459-4239 PAPER, LENS (81348) A-A-50177, TYPE I, CLASS 5 PVS-14 ARMASIGHT by FLIR U S E R M A N U A L...
Page 48
OTS-Export@flir.com Technical Support, Repairs, Returns, Refunds & Warranty: OTS-Support@flir.com www.flir.com www.armasight.com Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice.